







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Showers & Shower Remodeling in Irving, TX
A walk-in shower remodel in Irving typically runs $6,500 to $16,000 depending on tile, glass, and whether the drain has to move. It’s a curbless or low-threshold shower you step into without climbing over a tub wall, and it’s the single most requested change we hear from Irving homeowners who want to stay in their house as they get older. That range covers demolition of the old tub or shower, new waterproofing, tile, fixtures, and permit and inspection where the work requires one. We back every one with the 90-Day Done Right Promise.
Most of these jobs start with the same sentence: “I can’t get my leg over that tub anymore.” Sometimes it’s a parent who’s visiting more and getting less steady. Sometimes it’s a knee replacement. Sometimes it’s just a 1950s tub surround that’s grown a black ring of grout that won’t come clean no matter what you scrub it with. Whatever brought you here, the fix is the same in outline and different in every detail, and that’s where the written scope matters. You can read the broader picture on our Bathroom Remodeling in Irving page, or call us at (833) 991-4970 and we’ll tell you straight whether what you’re picturing fits your plumbing and your budget.
Irving has a specific housing mix that makes shower work its own animal. The older neighborhoods around South Irving and the Hospital District have a lot of 1950s and 1960s slab-on-grade ranch homes where the tub drain sits in the slab, not a wood subfloor. Move that drain even twelve inches and you’re cutting concrete and re-pouring, which is real money and real dust. Meanwhile the newer builds off Las Colinas and Valley Ranch are more likely to have a wood subfloor and a second-floor bathroom where a leak goes straight into your dining room ceiling. We look at which house you’re in before we quote a number, because the same shower can be a very different job depending on what’s under the tile. That’s also why we pull permits and get inspections signed on the jobs that require them – the inspector who checks the waterproofing before the tile goes down is working for you, not for us.

When You Need Walk-In Showers & Shower Remodeling
Here are the situations we see most often in Irving. If two or three of these sound like your bathroom, it’s time for a conversation.
- You can’t step over the tub wall safely anymore. A standard tub apron is 15 to 17 inches high. For someone with balance issues or a recovering hip, that’s a daily risk, and a low- or zero-threshold shower with a seat turns a hazard into a routine.
- The old shower pan is leaking. In Irving’s older homes, a 20-plus-year-old fiberglass pan or a tiled pan with a failed liner will quietly rot the subfloor and the framing behind it. You’ll smell the damp before you see the damage, and by the time the tile cracks you’re already into structural work.
- Mold keeps coming back in the grout and caulk. Irving’s summer humidity plus a shower that never fully dries equals recurring mold. Grout is not the problem – the wall behind it is staying wet. A properly waterproofed shower with a slope that actually drains fixes the cause.
- You’re planning to age in place. Grab bars, a built-in bench, a handheld shower on a slide bar, and a zero-threshold entry are far cheaper to install during a remodel than to retrofit later on top of finished tile.
- The bathroom is too small and dark for a bathtub you never use. Plenty of Irving homes have a tub that’s been used twice in ten years. Replacing it with a walk-in shower can open up the whole room.
- A tile shower is on its last legs. Cracked, hollow-sounding tile, loose grout lines, and a floor that flexes underfoot all point to a pan or waterproofing failure that resurfacing won’t actually fix.
If any of that reads familiar, the honest next step is a look at the actual shower – not a guess over the phone. Give us a call and we’ll come see what’s under it.
Our Walk-In Showers & Shower Remodeling Process
Every shower is different, but the order of operations that keeps you out of trouble is consistent. Here’s how a Barrett & Sons shower job actually runs.
- Site visit and written scope. We look at the drain location, the wall construction, the water supply, and whether a door or a fixed glass panel makes more sense for your layout. You get the full scope in writing before anything starts, including the tile allowance, the fixtures, and the drain work. An allowance that isn’t on paper is a surprise waiting for a date, so we put it in writing up front.
- Permits and inspection. Where the work requires one, we pull the permit and get the rough-in inspected before the walls close up. On a shower that means the plumbing and the waterproofing get checked by a third party while you can still see them.
- Demo and prep. Out comes the old tub or shower. We check the subfloor and framing, address any rot, and get the base solid and flat – a shower that’s going to last 20 years starts with a floor that doesn’t move.
- Waterproofing and tile. A bonded waterproofing membrane, proper slope to the drain, and a liner or surface-applied system done right is the whole ballgame. Tile is the pretty part; the layer underneath is what keeps Irving’s summer rain from finding a way in. Premium fixtures and tile choices are set here, and we install brands you can look up rather than mystery tile off a van.
- Fixtures, glass, and finish. Grab bars, seat, niche, and the glass door or panel go in. We set the glass so it swings and clears the way it should, and we run the shower during the punch walk so you can see it drain.
- Final inspection and the Done Right Promise. The inspector signs, you walk the room with us, and anything you’re not happy with gets written on the punch list. Then it’s backed by our written 90-Day Done Right Promise – if something isn’t right, one call brings us back.
Along the way, if the scope has to change because we found something under the tile, you get a written change order before any of the new work begins. No surprise invoice at the end.

Walk-In Showers & Shower Remodeling Pricing in Irving
Here’s the honest picture of what a walk-in shower costs in Irving. These are typical ranges, not a quote – your house, your plumbing, and your taste in tile will move the number.
| Job | Typical range |
|---|---|
| Basic tub-to-shower conversion (existing footprint, stock tile) | $6,500 – $9,500 |
| Walk-in shower with premium or large-format tile | $9,000 – $13,000 |
| Zero-threshold / curbless shower with bench and grab bars | $12,000 – $16,000 |
| Drain relocation (cutting the slab, re-plumbing, re-pouring) | $1,500 – $3,500 add |
| Glass door or fixed panel | $800 – $2,200 add |
What drives the cost up: moving the drain in a South Irving slab home, framing changes in a Valley Ranch second-floor bath, large-format tile that won’t tolerate a wavy wall, and premium fixtures. What keeps it down: keeping the shower roughly where the old one was, choosing stock tile, and skipping the door in favor of a fixed panel with a linear drain. Permits and inspection are folded into the scope where required – they’re not a surprise line item.
We give free written estimates and a no-trip charge inside the county, plus a free second opinion on any written estimate you’ve already got in hand. If you’re comparing bids, bring them to us and we’ll tell you what’s missing. Our technicians have up to 28 years of experience, and we’re happy to look up the license number with you before you sign anything – Tom publishes it for exactly that reason. Call (833) 991-4970 to start.
FAQs – Walk-In Showers & Shower Remodeling
How much does a walk-in shower cost in Irving, TX?
A walk-in shower remodel in Irving typically costs between $6,500 and $16,000, with most jobs landing in the $9,000 to $13,000 range. The low end covers a straightforward tub-to-shower swap in the existing footprint; the high end covers curbless entry, a bench, premium tile, and drain relocation on a slab. Call (833) 991-4970 for an exact written quote – estimates are free.
Can you convert my bathtub into a walk-in shower?
Yes, and it’s one of the most common jobs we take on in Irving. A tub-to-shower conversion reuses the tub’s drain in many cases, which keeps the cost down, but the wall behind the tub and the subfloor under it need a proper check first – tubs hide water damage for years. We scope the demolition, waterproofing, and tile in writing before we start, so you know exactly what you’re getting. Call us and we’ll take a look.
Do you pull permits for shower remodels in Irving?
When the permit is required by Irving’s building department for the work involved, yes – we pull it and get the inspection signed. That matters most on drain relocation, plumbing changes, and structural work, where a third-party inspector checks things you’d otherwise never see once the tile is up. It takes a little longer and it isn’t free, but a permitted job protects your home’s value and your insurance coverage if something goes wrong. Ask us whether your job needs one.
How long does a walk-in shower remodel take?
Most walk-in shower remodels take 1 to 3 weeks from demolition to final walk, depending on tile, glass lead time, and whether the drain has to move. A layout change on a slab can stretch that a bit; a like-for-like swap usually runs closer to the short end. We give you a realistic timeline in the written scope before we pick up a tool. Call (833) 991-4970 to get on the schedule.
Standing Offers and Next Steps
Right now we’re running four standing offers, every one of them on paper: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount. You don’t have to ask twice for any of them – just mention it when you call.
Whether you need a grab bar and a safer shower for a parent, a full tile shower with a bench and a curbless entry, or a straight tub swap, the team at Barrett & Sons is here to walk the room with you, scope it in writing, and stand behind it for 90 days after. A live person answers the phone around the clock, and Tom’s name, address, and license number are published for anyone who wants to check before signing. Call (833) 991-4970 for a free estimate, or read more on our Bathroom Remodeling service page.
Written by the team at Barrett & Sons Construction Irving, serving Irving.


