







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Driveway & Pavers for Irving Homeowners
Irving sits on the old blackland clay, and that clay moves with every wet and dry cycle. Driveways here crack along the seams, settle toward the garage, and hold water in low spots that never quite drain – especially in neighborhoods like Valley Ranch, Las Colinas, and the older streets off Story Road where slabs are 30-plus years old. We build pavers and concrete that account for that movement instead of fighting it. Our crews have up to 28 years of experience, we install Belgard and Techo-Bloc hardscapes you can look up by name, and every price change arrives in writing before work starts. Call (833) 991-4970 to schedule a free estimate.
What Our Driveway & Pavers Service Includes
Paver Driveways
Paver driveways are individual brick or stone units set on a compacted base, so the joints flex when Irving’s clay swells instead of cracking like a poured slab. You want them when your current concrete has spider-webbed past the point of patching, or when you’re after a look the neighbors’ plain gray drives don’t have. We excavate to depth, build a graded gravel base, and set Belgard or Techo-Bloc pavers with a proper edge restraint and polymeric sand. A typical Irving paver driveway runs $7,000 – $18,000 depending on square footage and pattern.

Concrete Driveways & Concrete Work
A good concrete driveway is poured thick enough, reinforced, and jointed so it cracks where we tell it to, not where it wants to. It’s the right call when you want a clean, durable surface without the upkeep of pavers, or when you’re replacing a slab the clay has pushed out of level. We pour at proper thickness with rebar or mesh, control joints spaced for Irving’s temperature swings, and a slope that sheds water away from your foundation. Concrete driveway installation here usually lands between $4,500 and $12,000.

Asphalt Driveways & Resurfacing
Asphalt is the budget-friendly option and goes down fast, but it needs a solid base and a seal coat every few years to hold up under Texas sun. It makes sense when your existing asphalt is worn but structurally sound and could use a fresh overlay, or when you want a driveway done without the cost of pavers. You’ll see Barrett & Sons Construction Irving tearing out failed sections, re-grading the base, and laying hot-mix asphalt with a proper crown. Paving runs $3,500 – $9,000, with resurfacing toward the lower end.

Driveway Repair & Replacement
Not every failing driveway needs to come out. Sometimes a widened crack, a settled corner, or a few broken pavers can be cut, repaired, and blended back in. But when the base underneath has gone bad, patching is a bandage and you’re back where you started in two winters. We’ll tell you honestly which one you’re looking at, then do the repair or full replacement with the same care. Replacement typically runs $5,000 – $14,000.
Patios, Walkways & Pool Decks
The same paver and concrete work that fixes a driveway extends to the back of the house – patios, front walkways, and pool decks around Irving’s backyard pools. You need it when your patio has heaved near a tree root, when bare concrete is slick by the pool, or when the walkway to the front door no longer matches the house. We set pavers on a graded base for patios and walkways and use slip-resistant finishes around water, so the surface behaves itself. Paver patio installation runs $3,500 – $11,000.
Brick Paver Driveway
Brick pavers bring a classic look that fits the established homes in old downtown Irving and around the Irving Heritage District. They also handle the clay better than poured concrete because each unit moves independently. We lay brick pavers with a herringbone or running-bond pattern, a compacted base, and a sand-filled joint that locks it all together. When a paver does crack down the road, we swap the single unit instead of replacing a whole slab.
Stamped Concrete Driveway
Stamped concrete gives you the look of stone or brick at concrete money, pressed and colored while the pour is still wet. It’s a good fit when you want more than plain gray but don’t want the price of real pavers. We stamp and color to a pattern you choose, seal it after curing, and joint it correctly so the surface stays sound through Irving summers. It’s concrete underneath and stays concrete where it counts.
Driveway Sealing
A seal coat is the cheapest insurance you can buy for asphalt or a stamped surface, and in our climate it’s what keeps a driveway from drying out and turning gray within a couple of years. You should seal when the surface has faded, when small cracks are starting to show, or every couple of years on asphalt. We clean, prep, and roll a proper sealer so it actually bonds. Sealing runs $250 – $700.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Driveway & Pavers
We install Belgard and Techo-Bloc pavers because they’re products you can look up and compare on your own time – real specifications, real warranty terms, not a name stenciled on the side of an unmarked van. We know how Belgard’s structural pavers hold an edge on a slope and how Techo-Bloc’s textured finishes wear in full sun, and we’ve placed both of them enough times to know which base detail matters under Irving’s clay. When a homeowner asks what’s going under their drive, we can tell them by name.
Those aren’t the only hardscape products we work with. We install a range of concrete and paver systems, and we’re just as careful setting a stamped pour or an asphalt overlay. If your project involves a James Hardie-sheathed home where the driveway has to meet the house cleanly, or you’re adding a KraftMaid-outfitted utility space and want the approach to match, we make the hardscape work with everything else on the property. Whether you’ve settled on Belgard, Techo-Bloc, or any other make, we can help you get it set right.
Signs You Need Driveway & Pavers Right Now
- Cracks wider than a pencil: Hairline cracks are normal. When a crack opens past a quarter inch and keeps growing, water is getting into the base and the slab is moving. Left alone through another Irving freeze-thaw cycle, it turns into a pothole or a heave.
- Water pooling against the garage or foundation: A driveway that slopes toward the house instead of away sends rainwater into places you don’t want it. This is the one we don’t suggest waiting on, because foundation moisture costs far more to fix than a driveway.
- Settled or heaved sections: If one corner has dropped or a slab has pushed up, the base underneath has failed. Resurfacing over it is money thrown away – the movement will show through within a season or two.
- Pavers that are loose or tilting: Loose pavers mean the edge restraint or base has given way. It’s a smaller fix now than after a few freeze cycles walk the whole field out of line.
- A faded, chalky asphalt surface: Asphalt that’s lost its black and looks gray and dry is oxidizing. Sealing it now, at $250 – $700, protects the surface for a couple more years and staves off the bigger replacement bill.
Our Driveway & Pavers Process – Step by Step
- 1
On-site walkthrough and measurement. We come out, walk the driveway with you, measure, and look at what’s really happening with the base. No guessing from a photo over the phone – the slab tells the story in person.
- 2
Written scope, written price. You get a line-item estimate that spells out excavation, base material, the specific paver or concrete spec, and disposal. Every allowance is on paper, because an allowance that isn’t on paper is a surprise waiting for a date. The free second opinion on any written estimate is yours if you want to compare.
- 3
Permits where they’re needed. Irving requires permits for certain driveway work and for anything that touches the right-of-way, and we pull them and get inspections signed. The permit inspector works for you, not for us – that’s why we like him.
- 4
Demo, base, and install. We tear out cleanly, haul the debris, compact and grade the base, then set the pavers or pour the concrete. Control joints go where the slab needs to move, and we keep the site swept and the street clear as we go.
- 5
Final walkthrough and the Done Right Promise. We walk the finished job with you, hand over the written 90-Day Done Right Promise, and if anything isn’t right, one call brings us back. No surprise invoices at the end, because every change went into writing before we touched it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Driveway & Pavers Cost in Irving?

A typical paver driveway in Irving runs $7,000 – $18,000, while a concrete driveway usually lands between $4,500 and $12,000. Asphalt is the lower-cost route at $3,500 – $9,000, and driveway replacement – pulling out the old and putting in new – runs $5,000 – $14,000 depending on length and depth of base work. On the smaller end, sealing is $250 – $700, and a paver patio or walkway is $3,500 – $11,000.
What moves the number: total square footage, how much failed base has to come out, whether the grade needs to be reworked around your foundation, the paver line you choose (Belgard and Techo-Bloc have a range), and how accessible the site is for equipment. To avoid overpaying, insist on a line-item quote and a written scope, and don’t let anyone sell you a resurface over a failed base – that’s how people end up paying twice.
Every free estimate includes the on-site walkthrough, a written line-item price, and the free second opinion on any competing written estimate. A senior or veteran in the household gets the permanent 10% discount, and inside the county there’s no trip charge. Call (833) 991-4970 for an exact quote – estimates are free.
Driveway & Pavers Near Irving – Our Service Area
We work across Irving and the towns around it – Euless, Coppell, Grapevine, Bedford, Colleyville, Grand Prairie, Hurst, Southlake, Lewisville, Arlington, and North Richland Hills. Because we’re local, a typical visit to most of these is a short drive, and our crews stay in the area rather than coming in from a call center three counties away. If you’re just over in Euless, or up in Coppell, the same clay and the same principles apply. Start from our home page to see every trade we handle, or jump straight to the Driveway & Pavers in Irving work.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Driveway & Pavers in Irving

Driveway and pavers covers the hardscape work in front of and around your home: paver and concrete driveways, asphalt, repairs, and the patios and walkways that tie into them. It’s the surface that takes the daily traffic and sheds water away from your foundation. We handle the whole job – base prep, installation, and cleanup – so you’re not juggling three different contractors.
Most concrete and asphalt driveways take a few days to install, and paver work usually runs a little longer depending on square footage and pattern. Repairs and sealing can be done in a single visit. The weather in Irving sets the real pace – concrete needs the right temperatures to cure, so we schedule around that rather than rush a pour that won’t hold.
A paver driveway runs $7,000 – $18,000, a concrete driveway $4,500 – $12,000, and asphalt $3,500 – $9,000, with replacement at $5,000 – $14,000 and sealing at $250 – $700. Patios and walkways sit at $3,500 – $11,000. The exact price depends on size, base condition, and materials. Call (833) 991-4970 for an exact quote – estimates are free.
Yes. Belgard and Techo-Bloc are two of the paver lines we install most, and we know how each one behaves on Irving’s clay base. We set them on a properly compacted and graded base with the right edge restraint so the field stays put. Whether you have your eye on a specific line or want help choosing, we’ll walk you through it.
We can take a look and tell you what we see. A failed base or a slope issue often isn’t covered by a surface-only warranty, and we’ll explain why in plain terms. Bring your written estimate from the other installer and we’ll give you the free second opinion.
A live person answers our phone 24 hours a day, seven days a week – not a voicemail box and not an out-of-state call center. If water is running into your garage or a section has heaved into a trip hazard, call and we’ll sort out the next step. For routine replacement and design work, we schedule it the normal way.
Every completed job is backed by our written 90-Day Done Right Promise. If something isn’t right, one call brings us back to make it right. It’s on the contract, not buried in fine print, and it’s the same on a small repair as on a full driveway replacement.
Clear vehicles, planters, and anything stored in the driveway or along the walkway before we arrive, and plan for a few days without full driveway access. If you have sprinkler heads or drains near the work zone, point them out so the crew can protect them. Beyond that, we handle the demo, hauling, and cleanup – you don’t need to stage anything for us.
Schedule Your Driveway & Pavers Service in Irving Today
Irving’s clay isn’t going to stop moving, and a driveway that’s already cracking or draining toward the house only gets more expensive to fix the longer it sits. Call (833) 991-4970 for a no-obligation free estimate – we’ll come out, walk the job, and leave you with a written line-item price and no surprises. A live person answers around the clock. Ask anyone on your street, or look up the license number yourself.
Written by the team at Barrett & Sons Construction.












