







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Richland Hills
If a gate in your backyard won’t latch at the top anymore, or the wind took out a run of pickets this spring, you’re in the right place. Barrett & Sons Construction installs and repairs fences throughout Richland Hills, and we’ve worked this corner of Tarrant County long enough to know the ground under your lot before we ever dig. It’s rich clay, and it moves. That changes how a fence has to be built here. Call (833) 991-4970 for a free estimate and we’ll come look at your yard, not just price it over the phone.
Why Barrett & Sons Construction Is Richland Hills’s Preferred Fence Installation Company

Richland Hills is small, fully built out, and squeezed between Fort Worth and the DFW Airport corridor. There’s no empty land here to build on, so almost everything we touch is a rebuild, a replacement, or a fence going up on an infill lot where the side yards are tight and the trees are older than any of us. We know that. We work those lots. Our crews have up to 28 years of experience, every eligible job gets permits pulled and inspections signed, and Tom Barrett puts his name and license number in writing where you can look them up before you sign anything.
Folks in Richland Hills have been burned by the outfit that quotes one number on the phone and delivers a bill with another number on it. We don’t work that way. Every scope, every allowance, every price change arrives as a written change order before a nail moves, because an allowance that isn’t on paper is a surprise waiting for a date. And when the job’s finished, it’s backed by the written 90-Day Done Right Promise. You call, we come back. A live person answers the phone any hour, any day.
Key Takeaways
- Fence installation in Richland Hills runs about $3,500 to $9,000, depending on material and linear footage.
- Posts on the shrink-swell clay under 76118 need to be set deeper than on stable soils, or they’ll lean within a season.
- Permits and inspections get pulled on eligible jobs, and any change gets priced in writing first.
- Free estimates. Written quotes. One phone call brings us back out.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Richland Hills
Our Fence Installation crews handle the whole job here, from the first measure to the inspection sign-off. Here’s how the most common requests shake out on Richland Hills lots.
Wood Fence Installation in Richland Hills
Cedar privacy fencing is still the standard on the single-story brick ranches that make up most of the housing stock around here. On an older lot with mature pecan or oak roots crowding the fence line, we set the posts below the active clay zone with concrete collars so the whole run stays plumb when the ground swells after a wet spring. A typical wood privacy fence in Richland Hills lands somewhere inside the $3,500 to $9,000 range, and the footage, height and gate count are what move it.

Privacy Fence Installation in Richland Hills
Most of the calls we get in 76118 are for true privacy, six-foot board-on-board or full-picket cedar, on lots where the neighbor’s kitchen window looks straight into your dining room. Tight side yards and narrow setbacks mean the layout gets drawn carefully before we dig. Where an older home sits on a slab that’s moved, we build the gate section to handle a little rack so it doesn’t bind six months in.

Fence Gate Installation and Repair in Richland Hills
Gates are where a fence shows its real quality. We hang adjustable hinges and latches so the gate stays true as the soil shifts under it, which matters a lot on the expansive clay here. If your current gate won’t close flush anymore, that’s often a post problem and not a hinge problem, and we’ll tell you which before quoting.

Vinyl and Aluminum Fence Installation in Richland Hills
For a maintenance-free run along a driveway or pool, we install vinyl and aluminum styles that hold up to North Texas sun and hail. Vinyl runs $3,500 to $9,000 and aluminum runs $4,000 to $10,000. Both are popular on the newer rebuilds going up where older homes have been scraped and replaced.
Trusted Brands We Service in Richland Hills
When the job touches a gate with a manufactured hardware gate kit or a fence-adjacent structure, you’ll want to know what’s going on it. We work with name brands you can look up yourself, including Owens Corning and CertainTeed where roofing and structures meet the fence line, and Atlas products on crossover jobs. We don’t stock parts in a warehouse, and we won’t tell you we do. What we do is pull the right product, schedule the crew, and get the fence up on the dates we put in writing. A fast turnaround here means a clean, correctly permitted job, not a rush.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Richland Hills Homes
The clay under Richland Hills is the story here. North Texas heat, dry summers and the shrink-swell clay combine to crack slabs and rack fences, and most of the fence trouble we see traces straight back to that. Here are the failures that show up on Richland Hills lots most often:
- Posts set too shallow in expansive clay. The original fence went in with posts that don’t reach below the active clay zone, so after the first dry summer the posts lean and the whole line racks. By the time a gate won’t latch, the footing has already moved.
- Reusing old cracked footings. A new fence built on top of the old, already-shifted concrete just inherits the problem. When we pull an old post and the footing is cracked or tilted, it gets replaced, not reused.
- Ignoring permit height and setback on tight infill lots. Richland Hills is fully built out, so side yards are thin. A fence that runs an inch over the height limit or too close to the property line fails inspection, and the work gets torn back out and redone.
- Damage from spring hail and storm-driven limbs. Hail-prone spring storms and older trees over the fence line knock pickets loose and split rails. We repair those runs and rebuild the ones that can’t take another season.
Why the clay matters more here than anywhere
Richland Hills’ shrink-swell clay causes slab movement that racks fence lines and gate posts, so a fence installed here demands deeper, clay-rated post footings and adjustable hinge hardware you simply wouldn’t need on stable soils. On a lot in a neighborhood like the ones off Handley-Ederville Road, the ground can move enough after a hard dry spell that a gate set with fixed hinges a year earlier suddenly drags. We build for that movement from the start. That means footings set below the clay active zone with proper concrete collars, and gate hardware with adjustment built in. It’s the detail a generic fence quote skips, and it’s the reason a cheap fence here has to be redone in three years.
How a fence job here usually goes
Most Richland Hills fence jobs start the same way: a failing or missing fence on a lot with mature trees and tight side yards, where the original posts were set too shallow in the expansive clay. After the first dry summer, the posts lean and the gates bind; then a spring hail storm knocks pickets loose. A qualified local pro will pull the permits, set posts below the clay active zone with concrete collars, and install adjustable hinges and latches so the gate stays true as the soil moves. If your fence is in that second or third year of trouble, it’s a good time to call.
Pricing for Fence Installation in Richland Hills, TX

Fence installation in Richland Hills typically runs $3,500 to $9,000, and that lead range is honest, not a hook. What moves the number is material, linear footage, height, gate count, and how much clay-rated footing work the site needs. A short vinyl privacy run is at the low end; a long cedar privacy fence with multiple gates and deep footings on a tight infill lot leans toward the top. Here are the line items we quote most often in 76118:
| Service | Typical Richland Hills Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Wood / Privacy Fence Installation | $3,500 – $9,000 |
Every estimate we give is a written, line-item quote. If the ground opens up and something changes, you get a written change order before any work touches the job. The free second-opinion offer stands if you’re holding another written estimate. Free estimate, no trip charge inside the county.
We Also Serve Cities Near Richland Hills
Richland Hills sits in the middle of the mid-cities, so we’re in and out of the surrounding towns all week. If you’re in Hurst, Bedford, North Richland Hills, or Arlington, we can take care of your fence there too. Same written scope, same permit discipline, same 90-Day Done Right Promise. We’re set up to serve Fence Installation in Richland Hills and the communities right around it.
Serving Richland Hills, TX – Our Local Coverage Area
We serve Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Richland Hills

Yes, most fence installations here need a permit, and we pull it on every eligible job. The inspection checks height limits, property-line setback, and correct post spacing and depth, and on the tight infill lots common in this fully built-out town, an inch over on height or a setback miss can fail the inspection and force a tear-out. The permit inspector works for you, not for us, and that’s a good thing: it’s the check most contractors skip. Call (833) 991-4970 and we’ll tell you exactly what your lot needs.
It affects everything, and it’s the biggest thing a generic quote gets wrong. The shrink-swell clay here expands when wet and contracts when dry, so posts set too shallow lean and rack within a season of drought. We set posts below the active clay zone with concrete collars and use adjustable hinge and latch hardware so the gate stays true as the ground moves. Call (833) 991-4970 for a free estimate that accounts for the soil.
You can, technically, but the clay is what makes DIY fencing risky here. Getting the posts deep enough, handling a permit and inspection on a tight lot, and hanging a gate that survives the first dry summer is a lot to ask of a weekend job, and one failed footing can mean digging it all back out. We handle permits, footings, and the inspection so the fence stands. Call (833) 991-4970 for a free second opinion on any estimate or plan you’re weighing.
It runs in five steps: a free on-site estimate, then a written line-item quote with the scope and any allowances spelled out, then permits pulled and the inspection scheduled, then installation with the posts set in clay-rated footings, and a final walkthrough where we punch out anything on your list. If a surprise turns up mid-job, it’s priced and approved in writing before we touch it. The whole thing is backed by the 90-Day Done Right Promise. Call (833) 991-4970 to get started.
We find them before we start digging, not after. On the first walkthrough we mark the irrigation lines and the property pins, and if a sprinkler line is running through a post hole, that gets flagged in the written scope so you’re not surprised by a repair bill. If something is uncovered mid-dig that wasn’t on the plan, we stop, price it in writing, and get your approval before we continue. No surprise invoices at the end. Call (833) 991-4970 for a free estimate.
Adding a fence or replacing one that’s lost the fight with the clay? You don’t need to know the difference between a concrete collar and a shallow footing; that’s our job. You just need a crew that shows up, pulls the permit, and builds it to survive Richland Hills’ ground. Ask anyone on your street, or look up the license number yourself. Call (833) 991-4970 to schedule your free estimate, and we’ll bring the written quote to your kitchen table.
Written by the team at Barrett & Sons Construction.












