







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Irving?
Walk-in shower installation in Irving typically costs $4,500 to $12,000, with most homeowners landing around $7,200 for a standard curbless or low-threshold shower with tile walls and a glass panel. That range covers demolition of the old tub or shower, waterproofing, tile, fixtures, and glass; a basic acrylic surround with a prefab pan sits at the bottom, and a fully tiled walk-in with a frameless glass enclosure, bench, and upgraded drain sits at the top. The number you get on the phone should match the number on your contract, and with us it does – scope, allowances, and any change order arrive in writing before work starts.
Key Takeaways
- Most Irving walk-in shower projects fall between $4,500 and $12,000, all-in.
- Glass, tile choice, and whether you move plumbing drive the swing more than anything else.
- A tub-to-shower conversion in Irving runs less – $3,500 to $10,000 – because the plumbing is already roughed in the right spot.
- Permits and inspections are included on every eligible job. The shower pan waterproofing is one of the most inspected items for a reason.
- Free second opinion on any written estimate you’ve already got in hand.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s how the $4,500 to $12,000 range breaks down line by line for an Irving job. These are installed prices – materials plus labor plus the permit – not “starting at” teasers.
| Line Item | Typical Irving Range | What Moves It |
|---|---|---|
| Demolition & haul-away | $400 – $900 | Cast iron tubs and mud-set tile walls take longer to break out than a fiberglass unit. |
| Plumbing rough-in (drain relocation, valve) | $500 – $2,200 | Moving the drain or adding a second shower head pushes this toward the top. |
| Waterproofing (pan liner or topical membrane) | $600 – $1,500 | Curbless and linear-drain showers need a sloped pan built from scratch. |
| Tile & setting materials | $900 – $3,000 | Large-format porcelain and natural stone cost more in material and labor. |
| Shower pan / base | $350 – $1,200 | A prefab acrylic pan is at the low end; a custom tiled pan sits higher. |
| Fixtures (valve, trim, head, drain) | $400 – $1,800 | Brand and finish – brushed nickel and matte black cost more than chrome. |
| Glass enclosure | $900 – $3,200 | Frameless 3/8″ glass with a door is the biggest single upgrade. |
| Permit & inspection | $150 – $450 | Required when plumbing or the drain is altered in Irving. |
Add it up and you can see why the swing is so wide. A builder-grade acrylic walk-in with a framed glass door lands near $4,500. A fully tiled curbless shower with a frameless enclosure, a bench, and a linear drain in a Las Colinas condo can reach $12,000 without anyone overpaying – that’s just what the materials and the labor add up to. The parts of the job you don’t see on the finished wall are the ones worth spending on: the waterproofing, the sloped pan, and the drain. A shower that leaks into the ceiling below costs far more to fix than the waterproofing ever would have.
If the shower is part of a larger project, the numbers stack. A full bathroom remodel in Irving runs $9,000 to $28,000, and a small bathroom remodel sits at $5,000 to $12,000. A straight shower replacement – same footprint, new everything – is the leanest path at $3,000 to $8,500.
What Affects Walk-In Shower Installation Pricing in Irving
Two showers that look identical on a Pinterest board can price $3,000 apart. Here’s what actually moves the number in Irving.
- Glass and enclosure style. A framed sliding door is the budget choice. A frameless 3/8″ glass panel with a hinged door is the showpiece – and it can add $1,500 to $2,500 to the job. Custom-cut glass for a non-standard opening costs more than a stock panel, which matters in the older homes around Heritage District where nothing is square.
- Curbless vs. curbed. A zero-threshold entry looks clean and ages well, especially if anyone in the house uses a walker or wheelchair. It also means the floor has to be recessed or the whole shower floor built up with a sloped mud bed, which adds labor. Irving homes on a slab – most of the city – handle curbless fine, but it’s a conversation to have before the tile is ordered.
- Tile size, material, and layout. Large-format porcelain in a straight stack sets faster than a small hex mosaic with a niche and a border. Natural stone like marble or travertine costs more to buy and more to seal and care for.
- Plumbing changes. Keeping the drain and valve where they are is the cheapest path. Moving the drain to center the shower, adding a bench with a second drain, or plumbing a rain head and a hand shower all add cost.
- Subfloor and framing condition. In older Irving neighborhoods, pulling out a 1970s shower sometimes uncovers rotted subfloor or a curb that was never properly waterproofed. That repair is real money – but it’s also the reason the old shower was leaking in the first place. We put it in writing as a change order before we touch it, never as a surprise on the final invoice.
- Permits and inspection. Any job that alters the plumbing needs a permit in Irving, and the pan inspection is one of the checks that catches bad work before it’s buried under tile. We pull permits on every eligible job and the inspector signs off before we close the wall.
One more local note: Irving sits on expansive clay soil, and slab movement over the years is why so many of the older homes here have out-of-level shower floors and doors that don’t close square. If your shower pan is cracked or the door drags, it’s worth checking the floor before assuming the shower itself failed. Our crew members have up to 28 years of experience reading exactly that kind of thing before it turns into a bigger job.

How to Save on Walk-In Shower Installation
You don’t have to spend the top of the range to get a shower that lasts. Here’s where the smart money goes.
- Keep the plumbing where it is. A same-spot install skips the drain relocation and keeps you closer to $4,500 to $7,000. It’s the single biggest lever on price.
- Choose porcelain over natural stone. Large-format porcelain looks like marble, costs less, and doesn’t need sealing. You’ll save $800 to $1,500 and get a shower that’s easier to keep clean.
- Skip the frameless glass if budget is tight. A semi-frameless enclosure gets you most of the look for $700 to $1,200 less. You can upgrade the glass later without redoing the tile.
- Bundle with other bathroom work. If the vanity is dated too, doing it in the same visit saves on mobilization and lets us order materials together. A bathroom vanity installation runs $800 to $3,000 and pairs naturally with a shower job.
- Get a second opinion – free. If another contractor handed you a written estimate you’re not sure about, we’ll look at it at no charge. We’ve seen plenty of Irving quotes padded with allowances that were never going to hold.
- Ask about the standing offers. We run $40 off any repair over $200, no trip charge inside the county, and a permanent 10% senior and veteran discount. Worth mentioning when you call.
Permits and inspections are included on every eligible job – not tacked on later as a surprise line. And every completed shower comes with our written 90-Day Done Right Promise: if something isn’t right, one call brings Tom back to make it right.
Walk-In Shower vs. Tub-to-Shower Conversion: Which Costs Less in Irving?
A tub-to-shower conversion usually costs less than a full walk-in install – $3,500 to $10,000 versus $4,500 to $12,000 – because the drain and supply lines are already in the tub footprint and you’re reusing that plumbing rather than relocating it. The savings shrink if the tub alcove is an odd size or the old tub was set in a mud bed that has to be broken out, but for most Irving homes the conversion is the budget-friendlier route to a walk-in shower.
A straight tub-to-shower conversion is also the most common request we get from homeowners in their 60s who want to step over a low threshold instead of a tub wall. If that’s you, the curbless option is worth pricing – it adds a little to the total but changes how the shower works for the next 20 years.
What Should a Walk-In Shower Estimate Include in Irving?
A walk-in shower estimate in Irving should list, in writing, the demolition, the plumbing work, the waterproofing method, the tile and setting materials by brand and SKU, the fixtures, the glass, the permit, and the cleanup – plus a stated allowance for anything that can’t be seen until the wall opens. If any of those is missing, the price you were quoted isn’t the price you’ll pay.
We put every scope and every allowance in writing before work starts, and any change arrives as a written change order before a single nail moves. The permit inspector works for you, not for us – that’s why we like him. Our full Irving service area page covers which neighborhoods we work in and how quickly we can get out, and you can see the rest of what we do on our home page.
If the shower is part of a wider update, it’s worth knowing what the other pieces run. A kitchen remodel runs $14,000 to $45,000, a roof replacement $8,000 to $20,000, and a impact window installation $8,000 to $25,000. For outdoor projects, a paver patio installation runs $3,500 to $11,000 and a vinyl fence installation $3,500 to $9,000. A home addition starts at $45,000, and an ADU build runs $90,000 to $220,000 if you’re adding living space rather than just a shower.
FAQs – Walk-In Shower Installation Cost
How much does a walk-in shower cost in Irving in 2026?
A walk-in shower in Irving costs $4,500 to $12,000 installed in 2026, with most projects around $7,200. Call (833) 991-4970 for an exact quote – estimates are free.
Can you install a walk-in shower in one day?
No. A walk-in shower takes 3 to 7 working days for a typical Irving install, mostly waiting on waterproofing cure time, the pan inspection, and glass fabrication. A prefab acrylic unit can go in faster, but a fully tiled shower can’t be rushed without risking a leak. Call (833) 991-4970 to get on the schedule.
Is it cheaper to repair my shower or install a walk-in?
Repair is cheaper when the pan and tile are sound – a valve or drain fix runs $200 to $600. Once the pan is leaking or the tile is failing, a walk-in install at $4,500 to $12,000 is the better spend because a repair on failing waterproofing is money into a wall you’ll open again. Call (833) 991-4970 and we’ll tell you honestly which one you’re looking at.
Does a walk-in shower add value to an Irving home?
Yes. A walk-in shower is one of the most requested features in Irving for buyers and aging-in-place owners, and it holds value because it’s both easier to clean and safer to enter. Buyers in Las Colinas, Valley Ranch, and the older neighborhoods near the Heritage District all ask about it. Call (833) 991-4970 for a free estimate and we’ll price the upgrade honestly.
Do you pull a permit for a walk-in shower in Irving?
Yes. Any walk-in shower that alters the plumbing needs a permit and an inspection in Irving, and we pull it on every eligible job. If a contractor tells you the permit is optional, that’s a red flag. Call (833) 991-4970 to get a permitted, inspected job with the paperwork in writing.
Do you offer a warranty on walk-in shower installation?
Yes. Every completed walk-in shower is backed by our written 90-Day Done Right Promise – if it’s not done right, one call brings Tom back to make it right. We also offer a free second opinion on any written estimate you’ve already received. Call (833) 991-4970 today.
Ready to stop guessing at the number? Barrett & Sons Construction Irving pulls permits, puts every scope and allowance in writing, and backs the work with the 90-Day Done Right Promise. A live person answers the phone 24 hours a day. Call (833) 991-4970 for a free estimate on your walk-in shower in Irving.
Pricing reflects the Irving market as of 2026. Barrett & Sons Construction Irving offers free estimates – call (833) 991-4970.
What Our Customers Say
"Addition over the garage matched the original roofline and brickwork so closely that visitors do not realise it was added. He tracked down the closest brick he could find rather than settling."
- Gideon Stroud"The bathroom was finished on the day he said at the start, which nobody had led me to believe was possible."
- Loretta Vanterpool"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."
- Redmond Cavanaugh












