







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Does a General Contractor Do in Irving, TX? The Answer Starts Under the House
A general contractor plans the job, pulls the permits, hires and supervises the subcontractors, manages the budget and schedule, and stands behind the finished work as the single responsible party. In Irving, that job starts before anyone lifts a hammer: a GC who knows this city spends the first week determining what the clay soil is doing under the slab, whether the original cast-iron sewer line is still round, and whether the design will clear HOA architectural review. Skip those three and the project is already behind. Call (833) 991-4970 for a free estimate.
The generic answer you’ll find on every other site – “a GC hires and manages subs” – is technically true and practically useless. On a 1962 ranch house in south Irving, the sub management is the easy part. The hard part is the ground.

The Irving Pre-Construction Phase: Soil, Sewer Lines, and HOA Covenants
North Texas sits on expansive black clay that swells in a wet spring and shrinks through a dry August. That movement is why foundation repair and drainage work are constant needs here, and why a bathroom remodel in Irving is never just a bathroom remodel until someone has looked at what’s holding it up.
We scope every job for foundation risk before we price it. That means checking for the stair-step cracks over door frames, the doors that stick in summer and swing free in winter, and the sloping floors that tell you a pier-and-beam house has settled unevenly. On slab homes, it means looking at drainage: where the gutters dump, whether the grade pushes water toward the house, whether there’s a downspout pouring into a planter box against the wall. Water management and foundation behavior are the same conversation in Irving, and a GC who treats them as separate trades has never dug around here.
On pre-1980 homes, we order a sewer camera scope. In south Irving’s older neighborhoods, the original cast-iron drain lines under pier-and-beam houses are collapsing, and that hidden cost shows up in the middle of what the homeowner thought was a modest bathroom update. A camera scope is cheap. Discovering a broken line after the new tile is set is not. We’d rather find it on a Tuesday in the estimate than on a Friday in the demolition.
Then there’s the Las Colinas and Valley Ranch side of the city, where the work runs the other direction. Those master-planned communities carry strict architectural covenants – brick or stone exteriors, no visible metal sheds, solar panels screened from the street – and an addition that ignores them gets stopped at review. Reading those covenants is part of the GC’s job here. It’s not glamorous. It’s the reason the project doesn’t sit in a holding pattern for six weeks.
What the pre-construction week actually includes
- Site walk and foundation assessment, including drainage and grade
- Sewer camera scope on homes built before 1980
- HOA architectural requirement check for Las Colinas, Valley Ranch, and other covenant neighborhoods
- Permit application and inspection scheduling with the city
- Written scope, written allowances, and a line-item estimate
That last item matters more than most homeowners expect. An allowance that isn’t on paper is a surprise waiting for a date.
Change Orders: What a GC Owes You When the Job Surprises Everyone
A change order is a written document that prices a scope change and gets signed before the work changes. A general contractor’s real job is to price every foreseeable risk upfront and document every unforeseeable discovery as a written change order before a single nail moves.
Here’s what that protects you from. You get a bid from a company that quoted one number on the phone. Three weeks in, the framing reveals rot behind the shower wall – common in older Irving homes where a slow leak has been feeding a stud bay for years – and now the phone number is different from the invoice number. The homeowner has no paper trail, no agreed price, and no leverage. That’s not a construction problem. It’s a documentation problem, and it starts at the estimate.
We write the scope, the allowances, and every price change into the contract. When we open a wall and find something, you get a change order with a price on it before anyone touches the repair. If you don’t sign, the work doesn’t proceed. That’s the whole protection: you always know what you’re paying and why.

Permits and Inspections: The Paper Record That Protects Your Title
A GC schedules and passes city inspections at each phase – framing, rough mechanical/electrical/plumbing, insulation, final – and each signed inspection becomes part of the permit record on the property. That record follows the house. It’s what a buyer’s inspector looks for when you sell, what an insurance adjuster checks after a claim, and what a future contractor reads to understand what was done and when.
Permits get skipped more often than people think, usually because the last contractor told the homeowner permits were optional. They’re not. Unpermitted work can complicate a sale, complicate an insurance claim, and in some cases require the work to be redone to be brought into compliance. The permit inspector works for the homeowner, not for us – that’s why we like him.
Every eligible job we run includes permits pulled and inspections signed. Barrett & Sons Construction Irving has been owner-operated since 1998, and our technicians have up to 28 years of experience across the trades. Every finished job carries the written 90-Day Done Right Promise.
Subcontractor Accountability: One Contact, One Guarantee
Here’s the part the generic job description glosses over. On a typical Irving remodel – say a kitchen in the $14,000-$45,000 range – you’ll see a framer, an electrician, a plumber, a drywall crew, a tile setter, a cabinet installer, and a painter, often five or six separate companies over the course of the job. Each one has its own contract, its own schedule, and its own idea of who’s responsible when the tile doesn’t line up with the cabinet reveal.
The GC is the responsible party for all of it. Not “coordinator” in the soft sense – responsible. When something’s wrong, the homeowner has one call to make, not six. That’s the actual value of hiring a GC, and it’s the thing that evaporates when a homeowner tries to save money by hiring each trade directly.
What we manage, and to what spec
- Kitchens: KraftMaid cabinetry and Cambria quartz, with Kohler or Moen fixtures specified in the written scope
- Bathrooms: tub-to-shower conversions and walk-in showers, with the plumbing rough-in inspected before tile
- Roofing: GAF and CertainTeed systems, with the decking checked after North Texas hail and winter ice storms
- Windows and doors: Andersen and Marvin, which matters in a city where summer heat drives cooling costs
- Driveways and pavers: Belgard and Techo-Bloc, set on a base built for clay movement
Those are brands you can look up, not mystery products off a van. Ask anyone on your street – or look up the license number yourself.
How much does it cost to hire a general contractor in Irving?
Project pricing in Irving depends on scope, but here are the market ranges we work from, and they stay consistent because they’re built from the same labor and material costs across the city:
| Project | Typical Irving range |
|---|---|
| Small bathroom remodel | $5,000-$12,000 |
| Full bathroom remodel | $9,000-$28,000 |
| Tub-to-shower conversion | $3,500-$10,000 |
| Small kitchen remodel | $9,000-$20,000 |
| Full kitchen remodel | $14,000-$45,000 |
| Roof replacement | $8,000-$20,000 |
| Window replacement | $4,500-$15,000 |
| Paver driveway | $7,000-$18,000 |
| Home addition | $45,000-$130,000 |
| ADU construction | $90,000-$220,000 |
A foundation repair or a sewer line replacement, when the pre-construction scope turns one up, lands outside these numbers and gets priced as its own written line item. Our published standing offers apply toward the small stuff: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount.
FAQs
For most Irving bathrooms, yes, because the work spans three licensed trades plus a permit and an inspection. A 1950s ranch home in south Irving may also hide a failing cast-iron drain line that a GC would scope before demo. A GC pulls the permit, sequences the plumber and electrician, and carries the responsibility when the tile doesn’t meet the shower pan. Call (833) 991-4970 for a free estimate on yours.
A general contractor is licensed to pull permits, manages multiple licensed trades, and carries responsibility for the whole job; a handyman generally handles single-trade repairs and usually can’t pull permits for structural, electrical, or plumbing work. On anything that requires an inspection, the difference matters at resale and at claim time. Call (833) 991-4970 if you’re not sure which one your job needs.
A small bathroom usually runs three to five weeks and a full kitchen six to ten, with the permit and inspection calendar driving a good chunk of that. Additions run longer, and a foundation or sewer discovery adds time before framing starts. The schedule gets written into the scope, and any change comes as a change order first.
Yes – reviewing the community’s architectural covenants and building the design to match them is part of the pre-construction work in Irving’s planned communities. That means brick or stone exteriors where required and screening for things the covenants restrict. Getting that right before the permit application saves weeks. Call (833) 991-4970 to talk through your project.
One Number, One Name, One Guarantee
If you’d rather have it looked at, Barrett & Sons Construction Irving offers a no-pressure assessment in Irving. We’ll walk the site, check the soil and the sewer line if the house calls for it, write the scope and the change-order terms into the contract, and pull the permits. Call (833) 991-4970 for a free estimate – a live person answers, day or night. You can start with our home page to see the full range of work.
Written by the team at Barrett & Sons Construction Irving, serving Irving, TX.


