







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Irving Homeowners Choose GAF Construction
Barrett & Sons Construction Irving provides independent GAF roofing service across Irving, TX: we repair, replace, and install GAF systems – Timberline HDZ and Natural Shadow shingles, ProStart starter strips, and Cobra ridge vents – with work matched to the existing roof rather than guessed at. We’re an independent contractor, not a GAF dealer, and GAF doesn’t authorize or warranty our work. What that means for you is simple: no factory script, no upsell to the newest line, just a diagnosis of what your GAF roof is actually doing in North Texas heat and hail. Call (833) 991-4970 for a free estimate. Permits get pulled, scopes come in writing, and every job carries our 90-Day Done Right Promise.
Why Trust Barrett & Sons Construction Irving for Your GAF Construction?

Our technicians have up to 28 years of experience working with GAF roofing systems, and they’ve spent most of it on roofs that look exactly like yours – mid-century ranch homes in south Irving and HOA-reviewed properties out in Las Colinas and Valley Ranch. They know how Timberline HDZ shingles behave on a south-facing slope after twelve summers of Texas sun, and they know why a Cobra ridge vent clogs faster on a roof surrounded by mature pecan trees. That familiarity is the whole point. A roofer who reads the GAF spec sheet for the first time on your driveway will miss the small stuff.
We use genuine GAF accessories when we’re matching an existing GAF system, because mixing brands at the eave or ridge can create compatibility problems down the road. When repairs make more sense than replacement, we say so, even though it’s less money in the job. Every price change comes to you as a written change order before any work moves forward. We’re licensed and insured, we pull permits on every eligible job, and the inspector who signs off works for you – not for us. That’s why we like him.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common GAF Construction Problems We Fix in Irving
Most GAF roofs we look at in Irving fail in predictable ways. Here’s what we find, and why it happens:
- Wind uplift at the eave and rake edges. When GAF ProStart starter strips aren’t nailed to spec or the adhesive seal never gets activated, the first course of shingles catches wind and lifts. Once those tabs crease, they don’t lay flat again. We see this most after spring windstorms roll through the Elm Fork corridor, where gusts funnel across open ground.
- Premature granule loss on Timberline HDZ. South- and west-facing slopes take the worst of it. Intense UV plus attic heat bakes the shingle until the granules shed and the fiberglass mat starts showing through. On an Irving roof with poor ventilation, this can start well before the shingle’s rated life.
- Hail bruising on Timberline Natural Shadow. Hail doesn’t always tear a shingle – often it bruises the mat underneath, and the surface looks fine from the ground. The damage shows up months later as a leak. After a hail event in Irving, a close inspection beats a quick glance every time.
- Cobra ridge vent detachment or clogging. Blown debris and pest intrusion plug the vent, or the vent works loose at the fasteners. Either way, attic ventilation drops, heat builds, and every shingle on the roof ages faster. It’s a cheap fix that prevents an expensive one.
- Flashing failures at valleys and chimneys. Not a GAF product problem, but it’s the leak we find most often on GAF roofs in older Irving neighborhoods. Original flashing from the 1960s and 70s ranch homes has usually outlived its sealant, and water finds the gap before you notice a stain on the ceiling.
GAF Parts & Our Repair-vs-Replace Approach

We don’t stock GAF parts locally – we source them per job, which means you get the right shingle for your existing system instead of whatever’s sitting in a warehouse. When we’re matching an existing GAF roof, we use genuine GAF accessories: ProStart starter strip, Cobra ridge vent, and shingles from the same product line where it’s still available. For isolated damage on a sound shingle field, a quality aftermarket starter strip or ridge vent is acceptable and we’ll tell you when it is.
Repair is often the honest answer for a small area of damage – a few lifted tabs, one bruised slope, a clogged ridge vent. But widespread granule loss or hail bruising across multiple slopes usually means the mat is already compromised, and patching just delays the leak. We’ll walk the roof with you, show you what we see, and give you a written scope either way. Call (833) 991-4970 and we’ll take a look – the estimate is free, and so is a second opinion on any written estimate you already have.
Our GAF Service Process – Step by Step
- 1
Diagnosis. We walk the roof, check the eave and rake for starter strip failure, probe the ridge vent for clogging, and photograph any granule loss or hail bruising. You see the photos before we recommend anything.
- 2
Written scope and repair-or-replace call. You get a line-item scope in writing – materials, labor, and any allowance – plus our honest read on whether repair or replacement makes sense for your GAF system.
- 3
Repair or install. For repairs, we remove damaged shingles, install a new GAF starter strip or matching shingles with proper nailing and sealant, and re-secure the first course. For replacements, we install the full GAF system to spec, with permits pulled and inspections scheduled.
- 4
Test and walk-through. We check the ridge vent airflow, inspect the flashing, and walk the finished work with you before we call it done.
- 5
Warranty and the 90-Day Done Right Promise. Every completed job is backed by our written 90-Day Done Right Promise. If something’s not right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterGAF Products We Service & Install in Irving
We work with the GAF lines that show up on Irving roofs most often: Timberline HDZ architectural shingles, Timberline Natural Shadow, ProStart Starter Strip, and Cobra Ridge Vent. That covers the majority of residential GAF systems in south Irving’s older ranch homes and the master-planned communities out toward Valley Ranch. If your roof carries a different GAF line, tell us what’s up there and we’ll confirm whether we can match it before we schedule anything. We install and repair across Irving, from the Bear Creek corridor to the Las Colinas edge.
We Also Service These Brands
GAF is one brand in a bigger toolbox. We also work with KraftMaid cabinetry, Kohler plumbing fixtures, PGT windows and doors, and Master Halco fencing – premium brands you can look up, not mystery products off a van. If your project touches more than the roof, you don’t need a second contractor for the rest of it.
FAQs – GAF Construction Service in Irving

No. We’re an independent GAF service provider, not a GAF-authorized dealer or contractor, and GAF doesn’t endorse or warranty our work. What we offer instead is experience: our technicians have up to 28 years working with GAF systems, and every job is backed by our own written 90-Day Done Right Promise. Call (833) 991-4970 to schedule a free estimate.
Yes, when we’re matching an existing GAF system we use genuine GAF accessories – ProStart starter strip, Cobra ridge vent, and shingles from the same line where available – because compatibility matters at the eave and ridge. For isolated damage on a sound shingle field, a quality aftermarket component is sometimes acceptable, and we’ll tell you when it is and why. We source parts per job; we don’t claim local stock.
Most GAF roof repairs in Irving are completed in a single day. A full roof replacement typically takes one to three days depending on roof size, pitch, and weather. We build the timeline into your written scope so you know what to expect before we start. Call (833) 991-4970 and we’ll give you a realistic window for your roof.
We service GAF Timberline HDZ, Timberline Natural Shadow, ProStart Starter Strip, and Cobra Ridge Vent – the lines most common on Irving roofs. If you’re not sure what’s on your roof, we can identify it during the inspection. Call (833) 991-4970 for a free estimate.
Properly executed repairs using compatible GAF materials generally preserve your existing GAF warranty, but we can’t guarantee that outcome and we’re not affiliated with GAF – so read your warranty terms and ask us to document the work. We photograph every repair and provide a written scope, which is what a warranty claim needs. Call (833) 991-4970 to talk through your situation.
GAF roof repair in Irving runs $400 – $1,800 depending on the damage, and a full GAF roof replacement runs $8,000 – $20,000 depending on roof size, pitch, and material line. Here’s the line-item breakdown:
| Service | Typical Range in Irving |
|---|---|
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
Prices are based on the Irving market and the scope we write for your roof – no surprise invoices, ever. Call (833) 991-4970 for an exact quote; estimates are free.
Book Your GAF Service in Irving, TX
If your GAF roof is lifting at the edges, shedding granules, or hiding hail damage you can’t see from the ground, get it looked at before the next storm. Call Barrett & Sons Construction Irving at (833) 991-4970 to schedule your free estimate. We’re licensed, insured, and owner-operated, and a live person answers the phone around the clock. Ask anyone on your street – or look up the license number yourself.
Written by the team at Barrett & Sons Construction Irving.












