







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Irving Homeowners Choose Master Halco Construction
Barrett & Sons Construction Irving is an independent Master Halco installer and repair resource for fencing systems across Irving, TX. We’re not affiliated with or authorized by Master Halco. What sets our Master Halco work apart is familiarity: we handle their vinyl, aluminum, steel, and chain link lines every week, so we know how their rails, pickets, post caps, and fabric behave in North Texas clay and heat. Every job comes with permits pulled where required, a written scope, and our 90-Day Done Right Promise. Call (833) 991-4970 for a free estimate.
Why Trust Barrett & Sons Construction Irving for Your Master Halco Construction?

Our technicians have up to 28 years of experience, and a good share of that has been spent on Master Halco fencing systems. We’ve set posts in the expansive black clay that runs through south Irving, and we’ve watched what three straight months of 100°F-plus afternoons does to a vinyl panel that was hung a little too tight. That kind of repetition teaches you where the weak points show up first.
We source OEM-compatible Master Halco parts, which matters more than it sounds. Color and profile matching on an Embassy or Elite vinyl panel, bracket tolerances on an Industrial series aluminum section, the exact gauge on 11.5-gauge chain link fabric: these aren’t interchangeable with generic hardware if you want the fence to look and hold like one piece. We keep the work warranty-safe where the manufacturer’s coverage applies, and we tell you up front when a repair might affect it. Tom Barrett publishes his name, address, and license number, so you can look any of it up before you sign. Background-checked crew members carry the Barrett & Sons name on every visit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Master Halco Construction Problems We Fix in Irving
Master Halco builds good fencing. The problems we see in Irving usually trace back to installation depth, soil movement, or heat, not the product itself. Here’s what calls us out most often.
- Vinyl privacy fence panels sagging and pickets bowing (Embassy and Elite series). After repeated 100°F-plus Irving summers, vinyl expands and softens. Where posts were set too shallow or without concrete, the whole run starts to lean and the pickets cup. We reset posts with deeper footings and re-hang panels with matched rails and pickets.
- Galvanized chain link fabric stretching and bottom rails rusting at grade. The expansive clay under Irving homes swells and shrinks with every wet and dry cycle, and sprinkler overspray keeps the bottom rail wet. That combination eats the galvanized coating at ground level first. A bottom rail and tension-bar replacement usually solves it without tearing out the whole line.
- Aluminum ornamental sections pulling loose from posts (Industrial and Residential series). Wind load and thermal expansion work on the top rails and brackets until the fasteners back out. It shows up as a wobbly section or a gate that won’t latch. New brackets, hinges, and post caps plus a re-tensioned frame fixes most of it.
- Steel ornamental powder coat chipping at welds (Titan and Regis series). Every weld and scratch point is a place the coating can fail. Once moisture gets under it, rust bleeds down the pickets and onto the hinges. Targeted touch-up early keeps it from spreading.
- Gate sag and hardware wear. Hinges and latches take the most abuse on any Master Halco system. We replace worn hardware with quality aftermarket parts when OEM isn’t available or is overpriced, and re-plumb the gate so it swings true.
One pattern worth naming: in south Irving’s older pier-and-beam neighborhoods, we often find fence posts set into ground that’s already been disturbed by foundation and drainage work, which is why a fence that looked fine two years ago is suddenly leaning. In the Las Colinas and Valley Ranch corridor, strict HOA architectural reviews mean the replacement panel has to match the approved profile exactly, so getting the OEM match right the first time saves a homeowner a second review.
Master Halco Parts & Our Repair-vs-Replace Approach

We use Master Halco OEM replacement parts (rails, pickets, post caps, brackets, and fabric) when color and profile matching matter, which is most of the time on a visible fence line. For gate hinges and latches, we’ll use quality aftermarket hardware where OEM is unavailable or priced out of proportion to the job. We don’t claim to stock parts locally. We source what each job needs, which means we’re not forcing a wrong-fitting part just because it’s on hand.
Repair is usually the right call for isolated panel or hardware damage. Full replacement makes sense when posts are rotted, leaning, or the fence line has failed over more than a few sections. We’ll show you which situation you’re in before you commit to either. Call (833) 991-4970 and we’ll take a look and give you a written estimate.
Our Master Halco Service Process – Step by Step
- 1
Diagnosis. We walk the line, check post depth and footing condition, look for coating failures at welds and grade, and test gate hardware. On aluminum and steel systems we check bracket tightness and frame tension.
- 2
Written scope. You get the repair or install plan in writing, with parts and allowances spelled out. If the scope changes mid-job, a written change order comes before any work continues.
- 3
Repair or install. Posts get set to proper depth in concrete, panels and pickets matched to your Master Halco profile, hardware installed and adjusted. Permits are pulled where required, and inspections signed.
- 4
Test and walk-through. Gates swing and latch, panels are plumb, tension is correct. We walk it with you before we call it done.
- 5
Warranty. Every eligible job is backed by the 90-Day Done Right Promise. If something isn’t right, one call brings Tom back.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Products We Service & Install in Irving

We service and install the Master Halco systems Irving homeowners actually have in their yards:
- Galvanized Chain Link (residential grade, 11.5-gauge)
- Aluminum Ornamental Fence (Industrial and Residential series)
- Vinyl Privacy Fence (Embassy and Elite series)
- Steel Ornamental Fence (Titan and Regis series)
We handle new installation, repair, and replacement across all four lines, with a focus on aluminum fence installation, vinyl fence installation, and the roof repair calls that often come bundled with exterior fencing work after a storm.
We Also Service These Brands
Barrett & Sons Construction Irving isn’t single-brand dependent. Alongside Master Halco, we work with KraftMaid cabinetry, Kohler fixtures, GAF roofing, and PGT windows. That range means when your Master Halco fence job turns into a bigger exterior project, one call covers it. Premium brands across every trade we touch.
FAQs – Master Halco Construction Service in Irving
No. We’re an independent installer and repair resource, not affiliated with or authorized by Master Halco. We work with their products because they’re solid fencing systems, and we’re upfront about that status on every job. Call (833) 991-4970 with questions.
Yes, when color and profile matching matter, which is most visible fence work. We use OEM rails, pickets, post caps, brackets, and fabric for Master Halco systems. For gate hinges and latches we’ll use quality aftermarket hardware when OEM isn’t available or is overpriced. Call (833) 991-4970 to talk through your job.
Most single-panel repairs or gate fixes take a few hours. A full fence run installation or a multi-section replacement typically runs one to three days depending on length and site conditions. We’ll give you a realistic timeline in your written estimate. Call (833) 991-4970 to schedule.
Galvanized chain link (residential grade, 11.5-gauge), aluminum ornamental (Industrial and Residential series), vinyl privacy (Embassy and Elite series), and steel ornamental (Titan and Regis series). That covers the vast majority of Master Halco residential fencing in Irving.
Not if the work is done correctly with compatible parts. We keep the work warranty-safe where manufacturer coverage applies and tell you up front when a repair might affect it. Call (833) 991-4970 and we’ll walk you through what applies to your system.
Here are the typical line-item ranges for the Master Halco work we do in Irving:
| Service | Typical Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Roof Repair | $400 – $1,800 |
Isolated repairs usually land on the low end. Full runs of new fencing push toward the high end. Call (833) 991-4970 for an exact quote. Estimates are free.
Book Your Master Halco Service in Irving, TX
Whether it’s a sagging Embassy panel, a loose Industrial series section, or a full new fence line, Barrett & Sons Construction Irving can help. Written scope, permits pulled where required, and the 90-Day Done Right Promise on every eligible job. A live person answers the phone 24/7. Call (833) 991-4970 for your free estimate.
Written by the team at Barrett & Sons Construction.












