







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Irving Homeowners Choose Belgard Construction
We provide independent Belgard construction service in Irving, Texas, installing and repairing Mega-Arbel and Catalina Grana pavers, Weston Wall blocks, and the Tandem wall system. What makes our Belgard work different is the base: we build and rebuild paver and wall bases for Irving’s expansive clay, compact in lifts, and set proper edge restraint, so the surface doesn’t heave or wash out after the first heavy rain. We’re an independent installer, not affiliated with or authorized by Belgard.
Call (833) 991-4970 for a free estimate on paver patios, paver driveways, and driveway replacement.
Why Trust Barrett & Sons Construction Irving for Your Belgard Construction?

Our crew members handle Belgard hardscape products regularly, and our technicians have up to 28 years of experience. That matters because Belgard has specific installation requirements: bedding sand depth, edge restraint type, joint sand specification, and drainage fall all affect how the finished surface performs. We follow those specs on every job.
For repairs, we use genuine Belgard OEM wall connectors, caps, and matching joint sand. These pieces keep color and structural consistency across a wall run; an off-brand cap or connector shows immediately and can compromise the restraint system. Where OEM doesn’t exist or isn’t needed (aggregate, geogrid, polymeric joint sand for certain applications), we specify quality products that perform correctly.
Warranty-safe practice means we document what we installed and how. If you have existing Belgard under manufacturer warranty, we don’t void it by cutting corners on base prep or drainage.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Irving
- Mega-Arbel and Catalina Grana pavers shifting and heaving. In Irving, expansive black clay swells and shrinks with every wet-dry cycle. When base compaction is inadequate or too shallow, pavers rock and settle unevenly. The fix is pulling the affected field, re-compacting the base to proper depth, and resetting.
- Joint sand washing out after heavy rain. North Texas storm events push water fast. If the patio lacks proper slope or edge restraint, water runs through joints and carries sand with it. Loose units and weed growth follow. Correct joint sand and correct fall solve it.
- Weston Wall and Tandem wall blocks bulging or leaning. These systems need geogrid and drainage aggregate behind the wall. When either is omitted, hydrostatic pressure from saturated clay pushes the wall out. The fix means rebuilding the section with proper reinforcement and drainage.
- Efflorescence and surface staining on lighter pavers. That white haze is mineral salt migrating to the surface, often where water ponds against the house or in low spots. It’s cosmetic, but chronic ponding points to a drainage problem underneath.
- Missing or failed edge restraint. Without proper edge restraint, the outer course of pavers creeps outward over time. The joints open, sand escapes, and the patio loses its shape. We reinstall correct restraint on every repair.
Belgard Parts & Our Repair-vs-Replace Approach

We don’t claim to stock Belgard parts locally. What we do is specify the right parts for each job and source them from Belgard’s supply chain. For structural and color-critical pieces (wall caps, connectors, matching joint sand), we use OEM. For base and drainage components, quality aftermarket aggregate and geogrid perform as well or better, and cost less.
Repair or replace comes down to the base. If individual units are settled or cracked but the base underneath is sound, we lift and reset them. If the base has failed, top-dressing won’t last; we tell you honestly that the section needs a full rebuild. Call (833) 991-4970 to schedule a free estimate.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We inspect the surface, joints, edges, and drainage, and check the base condition where possible. We photograph problem areas and pin down the cause: base failure, drainage, restraint, or all three.
- 2
Repair or install. For repairs, we pull affected units, re-compact the base, reset on fresh bedding, reinstall edge restraint, and re-sand with correct joint sand. For installs, we excavate to proper depth, compact base in lifts, set pavers, install restraint, and cut joints.
- 3
Test. We check slope and drainage by running water over the finished surface. Joints get a final fill and compaction. Walls get checked for plumb and drainage flow.
- 4
Warranty. Every eligible job includes permits where required, and every completed job is backed by our written 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Irving
We install and repair Belgard Mega-Arbel pavers, Catalina Grana pavers, Weston Wall retaining wall blocks, and the Tandem modular wall system. These lines cover paver patios, paver driveways, and retaining walls. Each has its own installation spec for bedding sand, joint sand, base depth, and reinforcement, and we follow those specs on every job. If you have a Belgard product not listed here, call and we’ll tell you what we can do.
We Also Service These Brands
Barrett & Sons Construction Irving isn’t limited to Belgard. We also work with KraftMaid cabinetry, Kohler fixtures, GAF roofing, and PGT windows. If your project includes multiple trades, we coordinate them under one scope. One written scope, one set of change orders, one point of accountability.
FAQs – Belgard Construction Service in Irving

Yes, in many cases, but only with the right preparation. We assess the concrete condition and drainage first. Installing pavers directly over cracked or sloping concrete without base prep leads to the same problems you started with.
Usually because the patio lacks proper slope or edge restraint, so water rushes through joints and carries sand away. Fixing the restraint and re-establishing fall solves the problem. Call (833) 991-4970 for an evaluation.
Generally 4 to 6 inches of compacted base for a patio and 6 to 8 inches for a driveway, depending on soil conditions. Irving’s expansive clay sometimes needs more. We assess your specific site before quoting.
Walls over about 3 feet tall, or any wall retaining saturated clay, need geogrid. Without it, hydrostatic pressure pushes the wall out. We evaluate wall height and soil conditions and specify geogrid where required.
Efflorescence is mineral salt migrating to the surface as moisture moves through the paver. It’s normal on new pavers and often fades with weathering. If it persists or returns repeatedly, it points to a water source. Call us to assess.
Belgard paver patio installation typically runs $3,500 to $11,000 in Irving. Paver driveway installation runs $7,000 to $18,000, and full driveway replacement runs $5,000 to $14,000. Driveway sealing is $250 to $700. Call (833) 991-4970 for an exact quote; estimates are free.
| Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
In Irving’s older south-side neighborhoods and in the Las Colinas and Valley Ranch corridor, the housing stock and site conditions differ, but the failure pattern is the same: a paver patio or driveway shows its first problem as a low corner where water stands after rain, or as joints that open and release sand within a year or two. The usual cause is a base that was too thin or not compacted in lifts over expansive clay, sometimes with missing edge restraint. A qualified local pro typically pulls the affected field, checks and re-compacts the base to depth, resets the Belgard units on fresh bedding, reinstalls edge restraint, and re-sands with the correct joint sand. If you’re seeing any of these signs on your Belgard surface in Irving, that’s a diagnosis problem before it’s a materials problem.
Book Your Belgard Service in Irving, TX
If your Belgard patio is heaving, your wall is bulging, or your driveway joints are washing out, call Barrett & Sons Construction Irving at (833) 991-4970. We’ll come out, diagnose the cause, and give you a written estimate with the scope spelled out. Estimates are free, and a live person answers the phone.
Written by the team at Barrett & Sons Construction Irving.












