







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling in Irving: What to Know First
We provide independent KraftMaid kitchen remodeling in Irving, and most full kitchens run $14,000 – $45,000 depending on cabinet layout, countertops, and how much plumbing or electrical moves. Smaller jobs land lower: a partial remodel or a cabinet-only refresh starts around $4,000. We’re an independent KraftMaid service provider, not affiliated with or authorized by KraftMaid, so we quote the work honestly and put every scope and allowance in writing before we start.
This page is for Irving homeowners who already own KraftMaid cabinets or are planning a KraftMaid kitchen and want a contractor who knows the product line, not a crew learning it on your dime. The KraftMaid brand is a good one. The installation and the layout are where kitchens get won or lost. Call (833) 991-4970 and a live person picks up, day or night.
How KraftMaid Products Fail – and How We Fix Them
KraftMaid builds a solid cabinet, but every line has its quirks, and Irving’s climate and housing stock bring out specific ones. Here’s what we actually see on KraftMaid jobs around here.
- Door and drawer finish wear on painted maple lines. KraftMaid’s painted finishes (common across their Maple and Cherry series) hold up well, but around the sink and the range the clear coat dulls and chips from steam and grease splatter. The real cause usually isn’t the finish itself, it’s a missing or undersized vent hood pulling moisture and heat straight at the cabinetry. We fix the finish and flag the ventilation so it doesn’t come back.
- Sagging or misaligned full-extension drawer glides. On older KraftMaid drawer boxes, the undermount soft-close glides loosen after years of a heavy utensil drawer getting slammed. The screws wallow out of the particleboard sides. We replace the glides with OEM or a quality aftermarket match and reinforce the mounting points, which is far cheaper than new drawer boxes.
- Warped or delaminating cabinet doors near the dishwasher and sink. Irving kitchens take on humidity from dishwashers and long hot summers, and the MDF-core doors in some KraftMaid series swell at the bottom edge and the laminate lifts. That’s a moisture issue, not a defect. We replace the affected doors and look at under-cabinet airflow and the cabinet base to stop the cycle.
- Loose or cracked face frames at the corners. When a KraftMaid cabinet was installed against an out-of-square wall (common in Irving’s older mid-century neighborhoods), the face frame racks over time and the doors rub. We re-square and shim on the remodel rather than forcing new doors onto a crooked box.
- Countertop and backsplash failures that look like cabinet problems. A settling laminate or quartz counter pulls away from the cabinet and the backsplash cracks. We check the cabinet run and the subfloor before we blame the top. Fixing the cabinet line first saves you from paying twice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our KraftMaid Kitchen Remodeling Process
Here’s how a KraftMaid job runs from your first call to the final walkthrough.
- 1
The call and the look. We come out, measure the existing layout, and check what’s worth keeping. If your KraftMaid boxes are solid and only the doors and top are tired, we’ll say so – refacing beats a full tear-out.
- 2
Diagnostics and the parts decision. We identify the exact KraftMaid series where we can, then decide OEM versus quality aftermarket for glides, hinges, and drawer hardware. OEM keeps you warranty-safe where it matters; aftermarket is fine for wear parts.
- 3
Written scope and line-item quote. Every cabinet, allowance, and dollar lands on paper before we order anything. If the plan changes mid-job, you get a written change order first.
- 4
Permits and the build. We pull permits on any eligible job and schedule inspections, because the last contractor a lot of folks used told them permits were optional. Cabinets, countertops, backsplash, flooring, and electrical all get sequenced so your kitchen isn’t torn up longer than it has to be.
- 5
Walkthrough and cleanup. We test every door, drawer, and hinge with you, hand over the paperwork, and back it all with our 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat KraftMaid Kitchen Remodeling Costs in Irving

These are real ranges for KraftMaid work in Irving. Your final price depends on cabinet count, countertop material, and how much plumbing or electrical moves.
- Full kitchen remodel (KraftMaid cabinets, counter, backsplash, flooring): $14,000 – $45,000
- Small or partial kitchen remodel: $9,000 – $20,000
- Cabinet installation (new KraftMaid): $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Backsplash installation: $800 – $2,500
- Kitchen island installation: $3,000 – $10,000
What moves the number: cabinet grade and finish, quartz versus laminate, whether the layout changes, and how much of your existing KraftMaid boxes we can save. Every price change arrives in writing first. Call (833) 991-4970 to schedule your free estimate.
Why Irving Homeowners Call Barrett & Sons Construction Irving for KraftMaid Work
We’ve been owner-operated since 1998, and Tom Barrett and his sons are on-site most days – you’ll shake a hand you recognize, not meet a stranger from a call center. Every job carries our 90-Day Done Right Promise in writing: if it’s not right, one call brings Tom back.
Our crew members have up to 28 years of experience and know KraftMaid’s lines well enough to tell you when to reface and when to replace. And because we install premium brands across every trade – Kohler fixtures, GAF roofing, PGT windows, Master Halco fencing – a KraftMaid kitchen is one part of a house we can actually take care of. Licensing, permits, and verifiable names, the whole way.
FAQs

Does remodeling my kitchen void my KraftMaid warranty? Not if the work is done right. KraftMaid’s warranty covers the cabinets, and proper installation that follows manufacturer guidelines keeps it intact. We’re an independent KraftMaid service provider, so we work to spec and use OEM parts where warranty coverage matters. Call (833) 991-4970 to talk through your specific cabinets.
Can you still get parts for older KraftMaid cabinets in Irving? Usually yes. KraftMaid has a long parts history, and their support line can identify the series from a door sample or model number. When an OEM part is unavailable, we match a quality aftermarket equivalent and tell you the trade-off in writing. Call us and we’ll check before you commit.
Should I reface or replace my KraftMaid cabinets? If the boxes are solid and the layout works, refacing saves you $4,000 – $13,000 compared to a full cabinet install. If the frames are racked or the layout is dated, replacement pays off. We’ll measure and give you the honest answer. Free estimates.
How long does a KraftMaid kitchen remodel take in Irving? A partial remodel runs one to two weeks; a full kitchen with new cabinets, countertops, and flooring typically takes four to six weeks, depending on inspection schedules. Call (833) 991-4970 for a timeline on your job.
Will the price change once work starts? Only if you approve it. Every scope or allowance change comes to you as a written change order before any work happens – no surprise invoice at the end. Estimates are free, so call (833) 991-4970.
Call (833) 991-4970 to schedule your free estimate on your KraftMaid kitchen project in Irving.
Written by the team at Barrett & Sons Construction Irving, serving Irving and nearby areas.












