A Barrett company - serving Irving, TX
A remodeled primary bathroom with a soaking tub and a walk-in shower
K
Kohler · Irving

Kohler Bathroom Remodeling in Irving, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Irving
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Kohler Bathroom Remodeling in Irving: What to Know First

Kohler bathroom remodeling in Irving typically runs $9,000 to $28,000 for a full gut remodel, and most Kohler jobs we handle – a new shower valve behind the wall, a vanity swap, a tub-to-shower conversion – take three to five weeks from tear-out to final inspection. We’re an independent Kohler service provider, which means we install Kohler fixtures and tile to the same standard Kohler builds their products to. If you’re in Las Colinas with a 1990s Memoirs bath you’re finally ready to gut, or in Valley Ranch with a shower cartridge that’s been weeping for a year, this page is written for you. Call (833) 991-4970 for a free estimate. We show up, we quote, and the quote doesn’t change unless it changes in writing.

Call (833) 991-4970

How Kohler Products Fail – and How We Fix Them

Kohler builds a good fixture. But “good fixture” and “no failure” aren’t the same sentence. Here’s what we actually find in Irving bathrooms, and why.

  • Cartridge corrosion in Kohler shower valves (Rite-Temp, 2-handle models from the 1990s). Irving’s water runs hard – Trinity River supply, plus the limestone-heavy well water once you’re out toward Hackberry or the unincorporated pockets near Belt Line. Hard water eats through the ceramic disc and brass cartridge in roughly 8 to 12 years. The symptom owners notice first isn’t a drip. It’s a shower that gets hot slower, or runs lukewarm on the left and scalding on the right. That’s a cartridge, not a valve body. We pull the cartridge, scope the body, and swap the cartridge for OEM whenever the body’s still true. A rebuilt valve costs a fraction of a full valve replacement behind tile.
  • Memoirs under-counter bath sink caulk failure at the backsplash. The Memoirs pedestal and undermount product line has a low rail profile against the baseboard – beautiful, but the caulk joint behind that rim fails in 4 to 6 years in Irving’s swing from humid summer to dry winter. Water tracks down and rots the cabinet toe kick, not the sink. We rebuild the joint with a silicone-based sealant rated for the expansion, not a latex tube.
  • Iron/steel bath tubs losing enamel at the overflow. Kohler’s cast iron tubs (Villager, Bellwether) hold up for decades but the enamel starves right under the overflow plate. That’s the drip you can’t find. We refinish rather than replace when the tub’s still solid, and we open the overflow to inspect the shoe gasket before we quote.
  • Faucet aerators and hand-shower screens clogging with mineral scale. Kohler’s Purist and Loure products have a fine mesh screen behind the aerator that clogs on Irving water within 18 to 24 months. The flow drops and owners think the faucet’s dead. It’s not. We pull, descale, and re-seat. If the aerator body itself is pitted, we replace it OEM.
  • Toilet fill valves (Kohler Wellworth, Cimarron) cycling short. The fill valve on Kohler’s 1.28 GPF models is a known wear point after 6 to 8 years. Short cycling on the fill isn’t a flapper problem; it’s the float cup. We replace the fill valve as a unit when it’s gone, not just the flapper, so you’re not back in six months.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Our Kohler Bathroom Remodeling Process

  1. 1
    Walk-through and diagnostic. We pull the aerator, check the valve cartridges, inspect the tub overflow shoe, and get eyes on the subfloor. On Kohler jobs, this matters more than on cabinet installs because the answer is usually behind the wall.
  2. 2
    Parts decision, in writing. OEM versus quality aftermarket gets decided out loud, on paper, with the Kohler part number on the change order. We don’t use the cheapest aftermarket cartridge and call it Kohler. We use Kohler OEM where it matters (cartridges, fill valves, drain shoes), and quality aftermarket where the OEM premium buys nothing (caulk, escutcheons on cosmetic replacement).
  3. 3
    Permits pulled. Every eligible Irving job gets a permit. Plumbing rough-in, electrical if we’re moving the vanity outlet, and final inspection. The permit inspector works for you, not for us – that’s why we like him.
  4. 4
    The build. Demo, rough-in, tile backer, tile, fixture set. Our crew members cap the water, protect the floor, and keep the rest of the house livable. Up to 28 years of experience across the bathroom side of the business, and the sons run the job, not a stranger.
  5. 5
    Test, hold, and walk-through. Every valve gets a 10-minute flow test at temperature. Every drain gets a bucket test. Every caulk joint gets the eye.
  6. 6
    90-Day Done Right Promise. Written on the contract. If something’s off, one call brings us back inside 90 days. That’s the whole promise.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Kohler Bathroom Remodeling Costs in Irving

Scope Typical Range
Full bathroom remodel (tub, shower, vanity, tile, Kohler fixtures) $9,000 – $28,000
Small bathroom remodel (powder room or half bath) $5,000 – $12,000
Kohler walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion (Kohler shower base and valve) $3,500 – $10,000
Shower replacement (base, tile, valve, trim) $3,000 – $8,500
Kohler vanity installation (cabinet and top) $800 – $3,000

Kohler fixture pricing pushes the low end up by $400 to $1,200 versus a builder-grade brand for the same footprint – a Kohler Rite-Temp valve and trim set runs more than a contractor special, and Kohler ceramic tile trims run higher than stock. What moves the number most: whether the valve body has to come out (a full-body valve on a 1990s Kohler install can add $600 to $1,400), whether the subfloor is sound (Irving slab-on-grade, always a check), and whether you’re keeping the tub or converting to a shower. Free estimates, line-item written. Call (833) 991-4970 for an exact quote on your Irving bathroom.

Why Irving Homeowners Call Barrett & Sons Construction Irving for Kohler Work

We’re not the biggest name in Irving, and we’re not a national outfit quoting one price on the phone and handing you another at the door. We’re the owner-operated alternative – Tom Barrett and his sons on the job, up to 28 years of technician experience on bathroom work, and a written 90-Day Done Right Promise on every contract. A live person answers the phone, 24 hours a day, seven days a week. We pull the permit, we get the inspection signed, and every price change is a written change order before a single Kohler cartridge gets swapped. We also install KraftMaid, GAF, PGT, and Master Halco on the rest of the house, so you’re not chasing a different crew for the roof when the bathroom’s done. Look us up before you sign anything – the name, address and license number are public. Ask anyone on your street.

FAQs

A tile setter installing wall tile in a shower

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
New double-hung windows in a dining roomA new front yard fence with a matching gateA new paver pool deckAn open kitchen and dining area after a remodelA new front entry door with glass sidelightsA new black aluminum pool fence with a gate

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Irving

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Irving team

A local vetted partner works across Irving and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 991-4970
Local Service Coverage

Request a Free Estimate in Irving

Tell us what you need - Barrett & Sons Construction Irving responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch