







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Kitchen Remodeling in Irving: What to Know First
Kohler kitchen remodeling in Irving typically runs $14,000 – $45,000 depending on cabinet layout, countertops, and whether plumbing or electrical moves. We’re an independent Kohler service provider, not affiliated with or authorized by Kohler, and most full kitchen jobs here finish in two to five weeks once permits clear.
This page is for Irving homeowners who already own Kohler fixtures, sinks, or faucets and want a remodel that keeps them working right. We’re Barrett & Sons Construction Irving, owner-operated and founded in 1998, and our crew members carry up to 28 years of experience on jobs just like yours. Call us at (833) 991-4970 to schedule your free estimate.
How Kohler Products Fail – and How We Fix Them
Kohler makes good products, but Irving’s water and weather work on them the same way they work on everything else. Here’s what we actually see in Irving kitchens and how we handle each one.
- Kohler Forté and Fairfax faucet cartridges that drip at the base. Irving’s water runs hard, and the ceramic cartridge seats wear faster than owners expect. The real cause is usually mineral scale binding the stem, not a failed cartridge. We pull the cartridge, inspect the valve body for scoring, and replace with the OEM Kohler cartridge rather than a generic one that fits but doesn’t seat the same. A faucet you can stop a drip on for $300 or less usually beats replacing the whole fixture.
- Kohler Whitehaven apron-front sinks that shift or leak at the front edge. The farmhouse sink is heavy, and when the cabinet face frame wasn’t built to carry it, the front rail sags and the silicone joint opens. We reset the sink on a proper support frame and reseal, so the Kohler sink you paid for sits level for the life of the cabinet.
- Kohler Bellwether and Memoirs cast-iron sinks with chipped enamel at the drain. Cast iron holds up for decades, but a dropped pan chips the enamel ring around the drain, and once it chips, the exposed iron rusts. We refinish where it holds, or replace the bowl if the rust has spread past the ring.
- Kohler undermount sink brackets that loosen behind stone countertops. Undermount sinks are held by clips and adhesive, and on a heavy cast-iron bowl those clips can fail when the countertop was cut slightly small. We re-bracket to the stone and check the seal at the same time, because a slow leak behind a cabinet is a rot problem waiting for a season.
- Kohler Purist and Composed pull-down sprayers with weak flow. The diverter and check valve clog with scale in Irving’s water and the sprayer loses pressure. We clean or replace the diverter and check valve so the sprayer works like new instead of getting swapped out for an aftermarket head that won’t match the faucet finish.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Kohler Kitchen Remodeling Process
Here’s how a Kohler kitchen job runs with us, step by step, from the first call to the walkthrough.
- 1
The call and the estimate. You call (833) 991-4970 and a live person answers, 24/7. We set a time, walk your kitchen, and write the scope and allowances down so nothing waits for a surprise later.
- 2
The written scope and change orders. Every allowance, every line item, and every price change goes on paper before any work starts. If the plan changes mid-job, you get a written change order first, not a bigger invoice at the end.
- 3
Permits and inspections. On every eligible job we pull the permits and schedule the inspections, because the last contractor most folks used told them permits were optional.
- 4
The Kohler parts decision. We check whether an OEM Kohler part or a quality aftermarket part is the right call for your fixture, and we tell you which and why before we order.
- 5
The work and the test. Cabinets, countertops, backsplash, tile, and the Kohler sink and faucet get installed and then tested: water on, drip check, sprayer check, sink seal check.
- 6
Cleanup and the 90-Day Done Right Promise. We clean up, walk the kitchen with you, and back the whole job with our written 90-Day Done Right Promise. One call brings Tom back to make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Kohler Kitchen Remodeling Costs in Irving

Here are the ranges we quote for Irving kitchens, so you know what to expect before anyone walks in the door.
| Job | Typical Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the price most in Irving is layout: moving plumbing or gas for a range or sink, upgrading countertops to stone, and whether your Kohler fixtures can be kept or need replacing. We don’t quote firm numbers over the phone and change them at the door. Call (833) 991-4970 for a free estimate and a written line-item quote.
Why Irving Homeowners Call Barrett & Sons Construction Irving for Kohler Work
We founded this company in 1998 and run it owner-operated, with Tom Barrett’s sons on the crews most days. It’s not a franchise dispatching strangers to your kitchen. Crew members are background-checked and carry the Barrett & Sons name, and the 90-Day Done Right Promise is written on every contract, not buried in fine print. We carry premium brands across every trade, so a Kohler kitchen job can also pull in KraftMaid cabinets, plus GAF roofing, PGT windows, and Master Halco fencing if the rest of your house needs work. Ask anyone on your street, or look up the license number yourself. The permit inspector works for you, not for us, and that’s why we like him.
FAQs

We handle independent Kohler service, and we’re careful to use warranty-safe practices so we don’t void coverage you already have. We’re not affiliated with or authorized by Kohler, so if a part fails under a Kohler warranty, we’ll tell you the right path and help you keep the record straight. Call (833) 991-4970 for a free estimate.
Often, yes, and a repair can save you real money during an Irving remodel. A dripping Kohler Forté cartridge or a loose undermount clip is usually a repair, not a replacement. We diagnose first, then give you the honest options. Call (833) 991-4970 for a free quote.
A full Irving kitchen remodel usually takes two to five weeks once permits clear, and a smaller job can run shorter. The timeline depends on cabinet lead times, countertop fabrication, and whether plumbing or electrical moves. Call (833) 991-4970 to schedule your free estimate and get a written schedule.
No price change happens without a written change order before the work proceeds. That’s the rule on every Barrett & Sons job: scope in writing, allowances in writing, change orders in writing. An allowance that isn’t on paper is a surprise waiting for a date, and we don’t work that way. Call (833) 991-4970 for a free estimate.
Yes, we pull the permits and schedule inspections on every eligible job. The permit inspector works for you, not for us, and we want the sign-off on the record. Call (833) 991-4970 to set up a free estimate.
Call (833) 991-4970 to schedule your free estimate with Barrett & Sons Construction Irving. We answer the phone live, 24/7, we write the scope and price changes down, and we back the work with the 90-Day Done Right Promise. Ask about our $40 Off Any Repair Over $200 and our permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Irving, serving Irving and nearby areas.












