







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers in Irving: What to Know First
We install and repair Belgard paver driveways and hardscape in Irving as an independent Belgard service provider, usually finishing a standard driveway in three to five working days once materials are on site. Paver driveway installation in Irving runs $7,000 – $18,000 for most homes, and we quote the whole scope in writing before we break ground. This page is for Irving homeowners who already own Belgard pavers, or who want them, and need someone who knows the difference between a Cambridge Cobble and a Mega-Lafitt bed detail. Call (833) 991-4970 and a live person picks up.
How Belgard Products Fail – and How We Fix Them
Belgard makes good pavers. What fails is almost never the paver itself, it’s the base and the bedding under it, and the way a particular series handles North Texas soil movement. Here’s what we actually see on Belgard jobs around Irving.
- Cambridge Cobble ruts in parking spots. Cambridge Cobble’s tumbled, pillowed face is beautiful on a walkway and thin on base tolerance under a driveway. When the compacted flex base underneath is under 4 inches or was never plate-compacted in lifts, the paver rocks and the joint sand washes out. We pull the field, re-excavate, and rebuild base in 2-inch lifts with a vibratory plate. That’s the fix, not more sand.
- Mega-Lafitt and Bergerac joint sand loss along the expansion line. These thicker, heavier profiles move a little more with our clay-heavy soil, and when the polymeric joint sand isn’t topped off after the first summer, weeds and water find the seam. We re-sand with polymeric joint sand and check that the edge restraint is actually pinned, not just glued.
- Efflorescence and hazing on light-colored Series like Catalina. That white bloom isn’t a bad batch. It’s calcium migrating out of the concrete paver, and in Irving’s humidity-and-heat cycles it shows up worst on north-facing driveways that stay damp. We clean it, and we tell you straight: it can come back once or twice in the first year before it settles down. A sealer helps, but only on a fully cured, dry driveway.
- Edge failure where a paver driveway meets the alley or street apron. This is where concrete meets city right-of-way, and it’s where Belgard installations fail first. We reset the edge course against a properly bedded restraint and check the apron slope so runoff heads where Irving’s drainage wants it, not back under the driveway.
- Warranty-voiding shortcuts by the last crew. We see driveways where someone set Belgard pavers directly on sand with no compacted base, or mortared a patio edge with no allowance for movement. That’s a failed install, not a failed paver. We repair it the way the manufacturer’s installation guide calls for, so you keep what warranty protection you have left.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Belgard Driveway & Pavers Process
- 1
Call and walk-through. A live person answers, and we set a time to look at your driveway in person. We measure, check base depth where we can see it, and ask what happened to the last install.
- 2
Written scope and written price. You get the full job in writing before we start: base depth, paver series and color, edge restraint, sand, drainage slope, and the dollar figure. If the scope changes mid-job, the change order comes in writing first.
- 3
Permits where they apply. A new driveway apron or a change to the street approach may need a city permit. We pull it and we pass the inspection. That inspector works for you, not for us.
- 4
Demo and base rebuild. We take out the old surface, excavate to depth, and rebuild the base in compacted lifts. On Belgard jobs, base is the whole ballgame.
- 5
Set, edge, and sand. Pavers go down to the correct slope, edge restraint gets pinned, and joints get filled with polymeric sand and compacted in.
- 6
Walk it together and hand over the guarantee. We walk the finished driveway with you, and it’s backed by the 90-Day Done Right Promise in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Belgard Driveway & Pavers Costs in Irving

Honest dollar ranges for Belgard work in Irving, the same numbers we quote across the site. What moves the price: driveway square footage, how much base has to be rebuilt, paver series (Mega-Lafitt costs more per square foot than Catalina), edging and drainage work, and whether a permit and inspection are needed.
| Job | Typical Range |
|---|---|
| Paver driveway installation | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement (tear-out and rebuild) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Asphalt driveway paving (for comparison) | $3,500 – $9,000 |
They’re ranges, not guesses, because two Irving driveways of the same size can differ by thousands depending on what’s under them. Call (833) 991-4970 to schedule a free estimate, and we’ll put a real number on paper for your driveway.
Why Irving Homeowners Call Barrett & Sons Construction Irving for Belgard Work
We’ve been at this since 1998, owner-operated from day one, and Tom Barrett and his sons are on site most days, not a call center three states away. Every scope, allowance, and price change is in writing before work happens, because an allowance that isn’t on paper is a surprise waiting for a date. We pull the permits and pass the inspections, and every finished job carries the 90-Day Done Right Promise: if it’s not right, one call brings Tom back. Our technicians have up to 28 years of experience, and we install premium brands you can look up, including KraftMaid, Kohler, GAF, and PGT alongside Belgard. Ask anyone on your street, or look up the license number yourself.
FAQs

Both. We install new Belgard paver driveways and patios and we repair existing Belgard work, including base rebuilds and joint sand replacement. We’re an independent Belgard service provider, not affiliated with or authorized by the manufacturer, so we install to their published guide and stand behind our own work. Call (833) 991-4970 for a free estimate.
Often, yes, and we aim to keep it that way by installing the way Belgard’s guide specifies (proper base depth, compacted lifts, edge restraint, polymeric joint sand). Some manufacturer warranties exclude failures caused by a bad original base, so we tell you upfront what’s covered and what isn’t. Call (833) 991-4970 and we’ll walk through it.
Repair when the base is sound and only a section has settled or lost sand; replace when the base is too thin, ruts run the length of the drive, or the edge has failed and keeps failing. We’ll tell you honestly which one you’re looking at before you spend anything. Call (833) 991-4970 to schedule a free estimate.
We schedule promptly and give you a real date, typically within a few business days for a repair and a few weeks for a full driveway install, depending on material lead times. We don’t promise same-day work on a job this size, because good Belgard work takes time. Call (833) 991-4970 for a date you can count on.
Usually, yes, since Belgard keeps core lines like Cambridge Cobble in stock for years, though some colors and profiles get discontinued. We confirm the exact series and color before we order, so the repair blends with the rest of the driveway. Call (833) 991-4970 and we’ll check what’s available.
When you’re ready, call (833) 991-4970 and a live person will schedule your free estimate for Belgard driveway and paver work in Irving. We answer around the clock, we tell you the price upfront, and we put it in writing before we start.
Written by the team at Barrett & Sons Construction Irving, serving Irving and nearby areas.












