







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Bathroom Remodeling in Irving: What to Know First
We provide independent Toto bathroom remodeling in Irving, and most full bathroom projects run 2 to 4 weeks from demolition to final inspection. If you’re weighing a smaller job – a vanity and fixtures, a shower replacement, a tub-to-shower conversion – the honest range is $9,000 to $28,000 for a full bathroom remodel and $5,000 to $12,000 for a small one. We quote in writing, pull the permits, and issue a written change order before any scope change touches the job.
This page is for Irving homeowners who own Toto fixtures and want a crew that treats them properly during a remodel, instead of tearing them out and talking you into builder-grade replacements. Call (833) 991-4970 and a live person answers, day or night.
How Toto Products Fail – and How We Fix Them
Toto makes good fixtures, but every line has its known weak points, and a remodel that ignores them creates callbacks six months later. Here’s what we see on Toto jobs around Irving and how we handle each one.
- Washlet seats and bidet functions that stop heating or spraying. On the S550e and C5 series, a dead seat heater or a weak wand spray usually traces to mineral buildup in the internal water path from Irving’s hard municipal water, not to a burned-out unit. We descale or replace the affected components and confirm the outlet is a properly grounded GFCI, since a shared bathroom circuit is the other common cause.
- Drake and Ultramax toilets that run or “ghost flush.” The fill valve and flapper on these lines wear at roughly the five-to-seven-year mark, and a slow leak into the bowl reads as a phantom flush at night. We replace with OEM Toto fill valves and flappers where the tank design calls for it, because aftermarket valves in a Toto tank often sit at the wrong height and cause short-cycling.
- One-piece and skirted toilets that rock or leak at the base after a floor tile change. Raising a bathroom floor with new tile and underlayment changes the flange height, and a skirted Toto toilet needs the correct extension kit or the wax ring won’t seal. We reset the flange to the right height before the toilet goes back on, every time.
- Wall-hung and in-wall carrier systems from the Aquia or wall-hung lines. When a wall-hung Toto gets re-tiled around, the carrier plate and flush actuator need to line up with the new tile plane. We test the flush and check the actuator alignment before the wall closes, not after.
- Nexus and Clayton models with cracked or clouded tanks. Some Toto tank styles are sensitive to over-tightening at the supply connection, and a hairline crack shows up as a slow drip down the back of the bowl. If the tank is cracked, we source the correct replacement tank or walk you through a full replacement rather than patching it with sealant.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Toto Bathroom Remodeling Process
- 1
The call and the walk-through. You call (833) 991-4970, we schedule a free estimate, and we look at every Toto fixture in the room – model numbers, age, and how it’s performing – before we talk about scope.
- 2
Diagnostics on the existing fixtures. We figure out what can be saved. A Toto toilet or shower valve that’s still solid often stays; a failing Washlet seat or a cracked tank gets replaced on the plan.
- 3
The parts decision. We walk you through OEM Toto parts versus quality aftermarket and where each makes sense. On fill valves and flappers in a Toto tank, we usually recommend OEM so the flush volume stays true to the design.
- 4
Scope, allowances, and permits in writing. Every line item, every allowance, and the permit plan arrive in a written estimate. The permit inspector works for you, not for us – that’s why we like him.
- 5
The remodel itself. Demolition, rough-in, tile, fixtures, and the Toto reset happen on the written schedule. Any price change arrives as a written change order before the work proceeds.
- 6
The test and the promise. We run every fixture, check for leaks at the flange and supply, and sign off before we call it done. The whole job is backed by our 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Toto Bathroom Remodeling Costs in Irving

Here’s what Irving homeowners typically spend on the jobs we run most often on Toto fixtures. These are real ranges, not teaser numbers.
- Full bathroom remodel: $9,000 to $28,000
- Small bathroom remodel: $5,000 to $12,000
- Walk-in shower installation: $4,500 to $12,000
- Tub-to-shower conversion: $3,500 to $10,000
- Shower replacement: $3,000 to $8,500
- Bathroom vanity installation: $800 to $3,000
What moves the price: whether the existing Toto fixtures can be saved or need replacing, tile and finish choices, whether a layout change moves plumbing, and whether a wall-hung carrier or floor flange needs adjusting. A master bath with a freestanding tub and a curbless shower sits high in the range; a hall bath with a new vanity and a Toto toilet reset sits low.
Call (833) 991-4970 for a free estimate. We give a written line-item quote and a free second opinion on any written estimate you already have.
Why Irving Homeowners Call Barrett & Sons Construction Irving for Toto Work
We’re an independent Toto service provider, but we know these fixtures well – our technicians have up to 28 years of experience, and we handle the details that matter on a Toto job, from OEM fill valves to skirted-toilet flange height. We’re owner-operated, with Tom Barrett and his sons on-site most days. Tom publishes his name, address, and license number – look it up before you sign anything. Every eligible job gets permits pulled and inspections signed, and every completed job is backed by the written 90-Day Done Right Promise. Any price change arrives as a written change order before the work happens.
On the rest of the bathroom, we work in brands you can look up – Kohler for faucets and other fixtures, KraftMaid for vanities, GAF and PGT on the exterior side if the job reaches it. And the standing offers are real: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount.
FAQs

It can, if the work is done carelessly or with mismatched parts. Toto’s warranty generally covers defects in materials and workmanship, but damage from improper installation, aftermarket parts, or a poor water supply connection can fall outside it. We use OEM parts where the design calls for them and follow the install specs so your coverage stays intact. Call (833) 991-4970 for a free estimate – estimates are free.
We source Toto parts for the fixtures we work on, including OEM fill valves, flappers, and replacement tanks for models like the Drake and Ultramax. Some specialty parts on wall-hung and Washlet lines take longer to arrive, and we tell you the timeline up front so it doesn’t slow the schedule. Call us for a free estimate and a straight answer on timing.
Repair if the fixture is solid and the problem is a worn part like a fill valve or flapper; replace if the tank is cracked, the Washlet electronics are failing, or the model is discontinued. We diagnose the fixture during the free estimate and give you both numbers in writing so you can decide. Call (833) 991-4970 for an exact quote.
Only if the scope changes, and only in writing. Every price change arrives as a written change order before a single nail moves – the allowance that isn’t on paper is a surprise waiting for a date, and we don’t do that. Call (833) 991-4970 to schedule your free estimate.
A full bathroom remodel typically takes 2 to 4 weeks, and a smaller job like a vanity and fixture replacement can finish inside a week. If special-order Toto parts are involved, we build the lead time into the written schedule so you know when the room comes back. Call (833) 991-4970 for a free estimate.
Ready to plan your Toto bathroom remodel? Call Barrett & Sons Construction Irving at (833) 991-4970 for a free estimate. A live person answers day or night, and we’ll walk your fixtures, your budget, and the written scope before you commit to anything.
Written by the team at Barrett & Sons Construction Irving, serving Irving and nearby areas.












