







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Backsplash Installation Costs in Irving, TX – and Why the Number Holds
Backsplash installation in Irving typically runs $800 to $2,500 for a standard ranch kitchen, with most jobs landing between $12 and $35 per square foot installed depending on tile choice. That range assumes sound drywall behind the old tile. Behind a range hood in a 1968 south Irving ranch, the wall is often the real story. Call (833) 991-4970 for a free estimate, and ask us to inspect the substrate before we quote a single tile.
We quoted a backsplash in a 1968 south Irving ranch home last spring. Behind the tile: green board that had turned to mush under 50 years of cooking steam. Once the sheetrock came down and new board went up, the substrate repair cost more than the tile did. That’s not a scare tactic. It’s the variable every generic cost guide leaves out, and it’s the thing that decides whether your quote holds six weeks later.

What Does a Backsplash Actually Cost in Irving Kitchens?
The honest answer depends on tile choice, square footage, and what’s behind the current splash. A standard ranch kitchen in south Irving or Valley Ranch usually needs 15 to 40 sq ft of field tile between the counter and the upper cabinets. Add full-height behind a range and you’re pushing the top of the range. Here’s how the real Irving market breaks down:
| Item | Installed Range |
|---|---|
| Basic ceramic field tile | $12 – $18 / sq ft |
| Glass or handmade tile | $22 – $35 / sq ft |
| Full-height Zellige or specialty stone | $40 – $65 / sq ft |
| Full standard backsplash job (typical scope) | $800 – $2,500 |
| Substrate repair (if old drywall fails) | $400 – $800 additional |
On smaller projects like cabinet installation, the tile is a small line item on a much bigger budget. If you’re remodeling the whole kitchen, the backsplash is often one of the last decisions you make, and the one the budget committee fights over most. Full Kitchen Remodeling of an Irving kitchen generally runs $14,000 to $45,000 depending on cabinet grade and layout changes, and the backsplash is a $1,200 line inside that. Small kitchen remodels at $9,000 to $20,000 leave tighter room for tile upgrades.
What Should You Look For in a Backsplash Contractor?
Ask three questions before you sign anything. The answers separate a real installer from a guy with a wet saw and a pickup.
- Do they scope substrate condition before quoting? A legitimate contractor treats the drywall behind the tile as part of the job, not a surprise at demo. Ask specifically: “What happens if you find failed drywall?” A good answer names a number and a written change order. A bad answer is “we’ll deal with it.”
- Does the price arrive in writing before a tile is set? Every scope, every allowance, every price change should show up as a written change order before work happens. An allowance that isn’t on paper is a surprise waiting for a date.
- Will they pull the permit if one applies? A tile backsplash itself doesn’t always need a permit, but electrical work for under-cabinet lighting does. Ask the question. The inspector works for you, not for the contractor – that’s why we like him.
Barrett & Sons Construction Irving writes a substrate inspection step into every backsplash scope. Every eligible job includes permits pulled and inspections signed. That’s the difference between a quote that holds on Monday and one that grows at invoice.

Why Substrate Condition Matters More in Pre-1980 Irving Homes
Irving’s housing stock splits sharply. The 1950s to 1970s ranch homes south of the airport often carry original drywall or green board behind the range and sink – walls that absorbed decades of cooking steam and grease without anyone noticing. In Las Colinas and Valley Ranch, the story is different. Those 1980s and 2000s master-planned homes usually have sounder substrate, but stricter rules about what’s visible from the street.
That’s a real distinction worth knowing. Some Las Colinas community guidelines specify tile material types visible through exterior windows. We review HOA documents before we specify any material, so a Saturday tile selection doesn’t trigger a Monday stop-work letter. If your homeowner’s association requires a specific palette or finish, we’ll know before you buy tile.
Grout and Setting Materials in North Texas Heat
Kitchens with west-facing windows in Irving can hit ambient temps high enough to move a wall, especially in July and August. That wall movement is why epoxy grout, or a sanded grout with a proper expansion gap at the countertop junction, actually matters. Cement wall board alone isn’t enough. The movement joint at the counter is what saves the tile when the studs do their seasonal dance. Ask any tile contractor who’s had a callback in August what they use.
How Does the Change Order Process Protect Your Budget?
If the substrate inspection reveals damage, you receive a written change order with the repair cost and a decision point before any additional work happens. You decide whether to proceed. You see the number before the nail is pulled. No surprise line items at invoice, no mystery charge at 5 pm on a Friday.
That process starts with scope in writing, allowances in writing, change orders in writing. If the discovery happens, so does the paperwork. Call (833) 991-4970 for a free second opinion on any written estimate.
What About the Design and Tile Brands?
Premium tile brands matter in a backsplash, but so does the setting material and grout behind them. We install brands you can look up, not mystery labels on a truck. On related hardscape work, we install Belgard and Unilock pavers; on cabinets we install KraftMaid, and on counters Cambria, so a kitchen remodel runs on materials that have a warranty someone will actually honor. The backsplash is the visible finish on top of that work.
What Does a Backsplash Quote Usually Include (and What It Shouldn’t)?
A legit quote covers tile, thinset, grout, labor, and disposal of the old tile. It should not include hidden trip charges inside the county, surprise haul-away fees, or mystery “shop supplies.” Barrett & Sons publishes a no trip charge inside the county, plus a $40 off any repair over $200 and a permanent 10% discount for seniors and veterans. Those standing offers apply to your backsplash job without a coupon.
FAQs
Backsplash installation in Irving runs $800 to $2,500 for a standard kitchen, or roughly $12 to $65 per square foot depending on tile. Basic ceramic field tile sits at the low end, glass and handmade tile in the middle, and full-height Zellige or specialty stone behind the range at the top. Call (833) 991-4970 for an exact quote – estimates are free.
Repairing the substrate is almost always cheaper if the existing tile is still salvageable, but once mold has reached the studs the tile has to come off anyway. In pre-1980 Irving homes, we usually find the substrate requires repair during removal, which is why the inspection step is built into the scope from day one. Call (833) 991-4970 and we’ll walk you through the options.
A standard 15 to 40 sq ft backsplash is typically a one to two day job, with grout going in the following morning. Full-height tile behind a range or intricate patterns take longer. If substrate repair is needed, plan on an extra day for the wall repair to dry. Call (833) 991-4970 to schedule a same-week estimate.
Most backsplash tile installation does not require a permit, but electrical work for under-cabinet lighting or outlet relocation does. Barrett & Sons pulls the permit and gets the inspection signed when one applies, so no corner gets cut behind your cabinets. Ask us about your specific kitchen. Call (833) 991-4970 – a live person answers any time.
Get a Backsplash Quote That Holds
Beyond the tile itself, a backsplash comes down to what’s behind the wall and who’s willing to put the discovery protocol in writing. Call Barrett & Sons Construction Irving at (833) 991-4970 for a free estimate. We’ll inspect the substrate before we quote, and the number we write down on day one is the number you plan around. Backed by our 90-Day Done Right Promise on every eligible job.
Written by the team at Barrett & Sons Construction Irving, serving Irving, TX.
What Our Customers Say
"Addition over the garage matched the original roofline and brickwork so closely that visitors do not realise it was added. He tracked down the closest brick he could find rather than settling."
- Gideon Stroud"The bathroom was finished on the day he said at the start, which nobody had led me to believe was possible."
- Loretta Vanterpool"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."
- Redmond Cavanaugh












