







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Kitchen Remodeling in Irving: What to Know First
Cambria kitchen remodeling in Irving typically runs $14,000 to $45,000, with most full kitchens landing between $22,000 and $34,000 once cabinets, quartz, backsplash, and flooring are all in. A countertop-only swap usually finishes in two to three weeks; a full kitchen with new cabinets and Cambria surfaces runs five to eight weeks. The number depends on how much of the old kitchen you keep and whether the layout moves. We give written, line-item estimates before anything gets ordered, and every price change shows up as a written change order before the work moves forward. If you’ve been quoted one number on the phone and handed another at the door, you’re exactly who this page is for. Call (833) 991-4970 for a free estimate.
How Cambria Products Fail – and How We Fix Them

Cambria is quartz, not natural stone, so it doesn’t fail the way granite or marble does. The failures we see in Irving kitchens are installation and design failures, and they cluster around the same handful of patterns:
- Seam ghosting and hairline cracks at the sink cutout. Cambria’s high-resin content makes seams nearly invisible when they’re placed well, which is also why a poorly placed seam shows up years later as a faint line or a stress crack. The cause is almost always a seam dropped too close to a sink or dishwasher cutout where thermal cycling flexes the slab. Our fix starts before fabrication: seam placement is planned against the cabinet layout, not eyeballed on install day, and the sink opening is eased so the slab can move.
- Cooktop and cutout edge chipping. Drop-in cooktops and undermount sinks on Cambria need eased or polished edges to survive the heat and the knocks around a working cooktop. We see chipped cutout edges most on jobs where the original installer rushed the polishing step. The fix is a polished edge, a heat-safe buffer, and a check of the cutout dimensions against the appliance spec before the slab is ordered.
- Discoloration along a windowsill or under-cabinet edge. Irving gets intense summer sun and long afternoon west-light exposure. Every quartz line, Cambria included, can amber slightly where direct UV hits an unprotected edge year after year. That’s not a defect in the slab; it’s the trade-off for choosing quartz over granite. We plan backsplash height and window trim with sun exposure in mind so the brightest edge isn’t the one that lives in full sun.
- Backsplash and countertop mismatch at the reveal. Cambria’s vein-matched designs look different in a full-slab run than in a small backsplash piece cut from the same batch. Homeowners sometimes expect the backsplash to line up with the countertop the way a fabricator promised, and it won’t when the two pieces are cut from different areas of the slab. We lay out the slab before cutting so a book-matched or veined line reads the way you want it to.
- Cabinets flexing under heavyweight quartz. Cambria runs heavier per square foot than laminate or even some thinner quartz brands, and a kitchen island spanning more than about six feet with a Cambria top needs proper support, not just a standard cabinet run. When we take on a Cambria kitchen in Irving, we check the cabinet boxes and the island framing before we measure, because a slab that sags a year later is a cabinet failure showing through the countertop.
One thing worth knowing: Cambria’s own care guidance discourages harsh abrasives and heat, and that guidance is stricter than what most owners are told at purchase. We follow the manufacturer’s care rules on every job, and we never recommend a sealer, because quartz doesn’t take one. As an independent Cambria service provider, we’re not affiliated with or authorized by Cambria, so we don’t make warranty promises on the slab; we make promises on the installation, which is where the failures actually live.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Cambria Kitchen Remodeling Process
Here’s what a Cambria kitchen job looks like from the first call to the final walkthrough:
- 1
On-site measure and layout. We measure the existing cabinets and floor, flag anything that will flex under a quartz top, and sketch where the sink, cooktop, and seams will land. No guesswork from a phone description.
- 2
Slab selection and material decisions. You pick your Cambria line and we write the allowance down: which series, which thickness, and how much the slab credit is worth. An allowance that isn’t on paper is a surprise waiting for a date.
- 3
Cabinet and substrate prep. If cabinets are new, we install or level them before the template. If they stay, we check level and support, because a flawless slab on a racked cabinet run reads as a sloppy job.
- 4
Template, fabrication, and install. We template the finished cabinets, confirm the seam plan, and set the slab with polished edges at every cutout. The backsplash and any island top go in on the same schedule.
- 5
Live test and inspection. We run water at the sink, check the cooktop clearance, walk the seams for flex, and get the permit inspection signed where the job requires it. The permit inspector works for you, not for us, and that’s exactly why we like him.
- 6
Cleanup and the 90-Day Done Right Promise. We haul the debris and walk you through the finished kitchen. Every job is backed by the written 90-Day Done Right Promise: if something’s not right, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterWhat Cambria Kitchen Remodeling Costs in Irving

Here are the ranges we quote on Cambria and kitchen work in Irving, and they stay consistent across every estimate we write:
| Job | Typical Range |
|---|---|
| Full kitchen remodel with Cambria counters | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Cambria countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Three things move the number most: whether the layout changes, which Cambria series you pick (some designs and thicker edge profiles cost more per slab), and how much plumbing or electrical has to move. A countertop-only swap stays at the low end. A full gut with new cabinets, island, and backsplash lands at the top. Estimates are free, and every scope, allowance, and change order arrives in writing. Call (833) 991-4970 for an exact quote.
Why Irving Homeowners Call Barrett & Sons Construction Irving for Cambria Work
Most homeowners we talk to in Irving have already had a national outfit quote one price on the phone and hand them a different bill at the door. We write it all down: scope, allowance for the Cambria slab, and any change order, before the work starts.
Every eligible job gets the permit pulled and the inspection signed. We install KraftMaid cabinets under Cambria, and we handle Kohler fixtures, GAF roofing, and PGT windows on the same projects, so a kitchen remodel doesn’t turn into four separate phone calls. Our crew members have up to 28 years of experience with premium surfaces and cabinetry. Our technicians have up to 28 years of experience. Calls reach a live person 24/7, not a voicemail box. And the 90-Day Done Right Promise is written on every contract, not buried in fine print. Senior and veteran homeowners get a permanent 10% discount, and if you’ve already got a written estimate from someone else, we’ll give you a free second opinion before you sign it. Call (833) 991-4970.
FAQs

No, not when the slab is installed to Cambria’s specs. Cambria’s warranty covers the slab itself, so the risk to your coverage comes from poor installation (bad seam placement, improper cutout edges) rather than from the remodel. We install to manufacturer spec, keep the paperwork, and back our own work with the written 90-Day Done Right Promise. Call (833) 991-4970 to talk through your specific slab.
A countertop-only Cambria install takes two to three weeks from template to finished backsplash. A full kitchen with new cabinets, island, and Cambria surfaces takes five to eight weeks. The timeline shifts if the layout changes and plumbing or electrical has to move. We give you the schedule in writing before we start. Call (833) 991-4970 for a schedule around your kitchen.
Usually yes, if the cabinets are solid and level enough to carry quartz without flexing. We check the boxes and island framing first, because quartz is heavier than the old laminate or formica and a sagging cabinet run will crack a seam. If your cabinets are sound, a countertop-only job keeps you in the $2,000 – $6,500 range. Call (833) 991-4970 and we’ll tell you honestly whether your cabinets can carry it.
Yes, on every eligible job. We pull the permit and get the inspection signed, because the last contractor most customers used told them permits were optional. If plumbing or electrical moves, a permit is part of the job, not an upsell. Call (833) 991-4970 and we’ll tell you what your project needs.
A full kitchen with Cambria counters runs $14,000 to $45,000, a small kitchen remodel runs $9,000 to $20,000, and a Cambria countertop install alone runs $2,000 to $6,500. Your final number depends on layout changes, which Cambria series you pick, and how much cabinetry and island work is included. Call (833) 991-4970 for an exact quote; estimates are free, and every price change is a written change order before the work starts.
Written by the team at Barrett & Sons Construction Irving, serving Irving and nearby areas.












