







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Irving Homeowners Choose KraftMaid Construction
Barrett & Sons Construction Irving provides independent KraftMaid service in Irving, TX: we install, reface and repair KraftMaid cabinetry for owners across south Irving, Las Colinas and Valley Ranch. What sets our KraftMaid work apart is that we treat the cabinet itself as a system – boxes, drawer boxes, hinges, glides, finish and countertop joints – instead of swapping parts and walking away. We’re not affiliated with or authorized by KraftMaid; we’re a licensed, insured and owner-operated local contractor who has worked on enough of this product line to know where it fails here. Our technicians have up to 28 years of experience. Call (833) 991-4970 for a free estimate.
Why Trust Barrett & Sons Construction Irving for Your KraftMaid Construction?

We’ve been working Irving kitchens and baths since long before KraftMaid became a stock-cabinet staple, and that’s given us a plain working knowledge of how the line actually behaves. We know the difference between Vantage Plus and Vantage Elite construction, that Momentum ships as modular ready-to-assemble cabinetry with its own hardware quirks, and that Portrait’s full-overlay framed doors are the ones most likely to fall out of alignment as hinge plates lose their grip. Waypoint and Chatham door styles in painted and stained finishes each age differently on a sunny wall.
Our technicians have up to 28 years of experience with cabinet installation, refacing and repair, and they use OEM-compatible parts – genuine KraftMaid doors, drawer boxes, hinges and glide kits when your color and style are still in production, and matched aftermarket hardware from the same overlay and finish family when they aren’t. Every scope arrives in writing with allowances itemized, and any price change comes as a written change order before work starts. That’s how we protect both your cabinets and your KraftMaid warranty: no drilling outside factory locations, no finish products the manufacturer won’t stand behind. Every eligible job gets permits pulled and inspections signed. Call (833) 991-4970 to schedule your free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Irving
These are the failures we see most often on KraftMaid cabinetry in Irving, and each one has a specific cause worth understanding.
- Painted and stained door finishes checking, blistering or peeling on south- and west-facing faces. Irving summer sun and the heat that builds in a closed kitchen push a cabinet skin past its rated tolerance, and the first place it shows is the stile of a door sitting near a window. In Valley Ranch homes with big west-facing kitchen glass, this shows up years sooner than the manufacturer’s guidance suggests.
- Particleboard-core Vantage drawer boxes swelling and delaminating around the sink base and dishwasher bay. Slow leaks and AC-condensate drips run down behind the cabinet face and soak the drawer bottom before anyone notices. Once the core swells, sanding won’t bring it back.
- Full-overlay door and drawer alignment drifting. As the particleboard or MDF hinge plates lose screw-hold, euro hinges sag, doors rub and the gaps between door fronts open unevenly. Portrait framed cabinets are especially prone once the plate screws start to wallow.
- Soft-close drawer glide and hinge failures on older Momentum and Vantage units. Worn nylon rollers, cracked hinge cams and stripped adjustment screws show up as drawers that slam or doors that won’t stay shut. Irving’s humidity swings accelerate the wear.
- Warped or racked boxes after foundation movement. The expansive black clay soils under south Irving’s older pier-and-beam homes shift enough to rack a cabinet run, which is why doors that closed fine in spring won’t close in August. The fix starts with re-shimming and re-anchoring, not new doors.
KraftMaid Parts & Our Repair-vs-Replace Approach
We don’t claim to stock KraftMaid parts locally – nobody reasonably does for a full product line. We source genuine KraftMaid replacement doors, drawer boxes, hinges and glide kits when your cabinet color and door style are still in production, and we match quality aftermarket soft-close hinges and slides when they aren’t, always matching your existing overlay and finish family. Refacing is honest value on sound Vantage boxes: new doors, new drawer fronts, new hardware, same carcass. When the carcass is swollen or delaminated at the sink base, replacement is the right call, and we’ll tell you so plainly rather than sell you a cosmetic patch. A typical KraftMaid call starts with a homeowner noticing peeling at the stiles under a south-facing window or a drawer that sticks after a humidity swing, and the fix is usually a mix: two or three door fronts, new hardware, and re-shimming so the overlay lines up again. Call (833) 991-4970 for a free estimate on a written, line-item quote.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the boxes, drawer boxes, hinges, glides, finish and countertop joints, and note which door styles are still in production, because that determines whether OEM doors or matched aftermarket parts are the sensible route.
- 2
Repair or install. We pull the affected doors and drawers, check for the hidden water damage behind the sink base, and either replace components or set and level new KraftMaid cabinetry to the existing layout.
- 3
Test. Every door and drawer gets opened and closed across its full travel, soft-close hardware is adjusted, and we confirm gaps are even across the run before we call it done.
- 4
Warranty. The job closes with the written 90-Day Done Right Promise on the contract, so if a hinge sags or an overlay drifts, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Irving
We cover the KraftMaid lines Irving owners most often own: Vantage, including the all-plywood Vantage Plus and Vantage Elite construction; Momentum modular and ready-to-assemble cabinetry; Portrait full-overlay framed cabinets; and the Waypoint and Chatham door styles in painted and stained finishes. That means cabinet installation and refacing, full kitchen remodeling, and kitchen design and layout work all fall within what we handle – from a single door front to a whole-room run. We install and repair, never claim to stock the line. Our crews work with the cabinets you own or specify.
We Also Service These Brands
We’re a multi-brand contractor, not a single-brand shop, so we can match materials across a whole project. Alongside KraftMaid, we install and service Kohler fixtures, GAF roofing, PGT windows and Master Halco fencing. If your kitchen remodel touches plumbing, windows or the roof, that’s one call and one written scope instead of three contractors pointing at each other.
FAQs – KraftMaid Construction Service in Irving

Is Barrett & Sons Construction Irving authorized by KraftMaid? No. We’re an independent licensed and insured contractor, not affiliated with or authorized by KraftMaid. We work on the product line as an independent local pro, which is exactly what lets us tell you honestly when replacing a cabinet is smarter than patching it.
Do you use genuine KraftMaid/OEM parts? Yes, when your cabinet color and door style are still in production – genuine KraftMaid doors, drawer boxes, hinges and glide kits. When a style is discontinued, we match with quality aftermarket soft-close hardware from the same overlay and finish family rather than force a poor fit. Call (833) 991-4970 for a free estimate.
How long does KraftMaid service take? A single door or drawer fix is often a same-visit job; a partial run with new door fronts, hardware and re-shimming usually takes one to two days on site, and a full install follows the kitchen schedule laid out in your written scope. We give you the timeline up front, not the morning of.
What KraftMaid models/series do you cover? Vantage (including Vantage Plus and Vantage Elite), Momentum, Portrait full-overlay framed cabinets, and Waypoint and Chatham door styles in painted and stained finishes. If you’re unsure which line you have, we’ll identify it from the door and box on the first visit.
Will service void my KraftMaid warranty? We work to protect it. We don’t drill outside factory hinge locations or apply finish products the manufacturer won’t stand behind, and we document the scope in writing. That said, whether a given repair affects warranty coverage is between you and KraftMaid – we’ll show you what the fix involves so you decide with open eyes.
How much does KraftMaid construction cost in Irving? Cabinet installation runs $4,000 – $13,000, a full kitchen remodel $14,000 – $45,000, a small kitchen remodel $9,000 – $20,000, countertop installation $2,000 – $6,500, backsplash installation $800 – $2,500, and a kitchen island installation $3,000 – $10,000. Call (833) 991-4970 for an exact quote – estimates are free.
Book Your KraftMaid Service in Irving, TX
Whether you need two door fronts replaced, soft-close hardware swapped, or a full KraftMaid kitchen installed and leveled, Barrett & Sons will give you a written, line-item estimate with no trip charge inside the county, a free second opinion on any written estimate, a permanent 10% Senior & Veteran discount, and $40 off any repair over $200. Call (833) 991-4970 for your free estimate and we’ll get your name on the schedule.
Written by the team at Barrett & Sons Construction.












