







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Fence Installation in Irving: What to Know First
We install Master Halco fence products across Irving, and most residential jobs run two to five working days depending on footage, material, and how many gates are involved. Barrett & Sons Construction Irving is an independent Master Halco service provider, which means we install their materials but are not affiliated with or authorized by the manufacturer. On price, we won’t quote you a number on the phone and then hand you a different bill at the door: fencing in Irving typically lands between $3,500 and $9,000, and every line item reaches you in writing before we start.
This page is for Irving homeowners who already own Master Halco fencing or have picked out a Master Halco product and want it installed correctly. Call (833) 991-4970 and a live person answers.
Key Takeaways
- We install Master Halco wood, chain link, vinyl, aluminum, and iron products in Irving.
- Typical Irving fence jobs run $3,500 to $9,000, quoted in writing.
- Permits get pulled and inspections signed on every eligible job.
- All work backed by the written 90-Day Done Right Promise.
How Master Halco Products Fail – and How We Fix Them

Master Halco covers a wide product range, and the failures we see in Irving are not random. They track the specific line and the specific ground conditions here. What we find on a Master Halco job:
- Wood fence post rot at the ground line on Master Halco’s wood lines. Irving’s clay-heavy soil holds water against the post after a rain, and we see decay setting in at the soil line first, not at the top. We set posts in properly drained footings and inspect the buried portion before we ever hang a rail on a post that’s already soft.
- Galvanized chain link coating failure at welded joints. On Master Halco chain link, the corrosion usually starts where the wire is welded, because those points hold moisture. In Irving, the swing between humid summer air and dry stretches speeds it up. We spec the heavier coating where it counts and replace whole damaged runs rather than patching joints that will fail again.
- Vinyl panel cracking at the rail pockets in summer heat. Master Halco vinyl is a common pick here, and the weak spot is where the panel seats into the rail. Expansion under a Texas sun is real. We install with proper clearances so the panel has room to move, which is the difference between a fence that lasts and one that splits by August.
- Aluminum and iron gate sag on the hinge side. Heavier Master Halco ornamental styles put real load on hinges and posts. We check post-set depth and hinge integrity on the diagnostic, then reinforce or reset the post rather than just tightening a sagging gate that will drop again.
- Fastener corrosion on the hardware, not the fence. We regularly see Master Halco panels that are still sound while the screws and gate hardware have rusted. We replace fasteners with coated hardware rated for outdoor use, which is a small line item that saves a whole fence.
On a parts decision, we’ll tell you when an OEM replacement part is worth it and when a quality aftermarket one is the smarter call. Either way it’s on the written quote.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Master Halco Fence Installation Process
- 1
The call. You call (833) 991-4970, a live person answers, and we schedule a time to walk the property.
- 2
The walk-through. We look at the existing Master Halco product, the soil, the grade, and the property line, and we talk through what you actually want.
- 3
The written estimate. Scope, materials, and every allowance go to you in writing, room by room and post by post.
- 4
Permits. On every eligible job we pull the permits and get the inspections signed. The permit inspector works for you, not for me.
- 5
Installation. Our crew members set the posts, hang the panels, square up the gates, and check every latch. Our technicians have up to 28 years of experience on fence work.
- 6
Cleanup and the guarantee. We haul off the debris, do a final walk with you, and back the job with the written 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Master Halco Fence Installation Costs in Irving

Here are the ranges we quote on Irving fence work. Your actual number depends on footage, material, gate count, and site conditions.
| Scope | Typical Irving Range |
|---|---|
| Vinyl fence installation (Master Halco) | $3,500 – $9,000 |
| Aluminum fence installation | $4,000 – $10,000 |
| Wood fence installation | $3,500 – $9,000 |
| Chain link and iron fence installation | quoted in writing per job |
| Fence repair (panels, posts, gates, hardware) | quoted in writing per job |
What moves the price most: total linear footage, gate count and style, whether we’re pulling old fencing first, and post depth on difficult grade. Nothing changes once work begins without a written change order in your hands first. Call (833) 991-4970 to schedule your free estimate.
Why Irving Homeowners Call Barrett & Sons Construction Irving for Master Halco Work
We’ve been owner-operated since 1998, and Tom Barrett and his sons are on-site most days. That matters when you have a question about your fence and want to talk to someone who saw it. The 90-Day Done Right Promise is written on every contract, not buried in fine print: if it isn’t right, one call brings Tom back.
We install premium brands across every trade we touch, so the same standard that goes into a KraftMaid kitchen, a GAF roof, or PGT windows goes into your Master Halco fence. Materials you can look up, not mystery brands off a van. Standing offers include a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount.
FAQs

Correct installation keeps a Master Halco warranty intact, and shortcuts are what put it at risk. We install to the manufacturer’s specifications and keep the paperwork straight, so you have a clean record if a warranty question ever comes up. Call (833) 991-4970 with questions before you sign anything.
Yes, we source OEM Master Halco parts where they’re the right call and quality aftermarket parts where they make more sense. We’ll tell you which and why on the written estimate. Call (833) 991-4970 to talk through your parts need.
It usually comes down to how many posts have failed and whether the panels are still sound. A single rotten post or a worn gate hinge is a repair; widespread post rot or coating failure across a run points to replacement. We give you the honest call on the walk-through. Call (833) 991-4970 for a free estimate.
Most residential jobs run two to five working days, with larger or gated jobs taking longer. We pull permits and schedule inspections on eligible jobs, which can add a little lead time. Call (833) 991-4970 to get a timeline for your property.
Yes, we pull permits and get inspections signed on every eligible job. If another contractor told you permits were optional, that’s worth knowing before you hire. Call (833) 991-4970 and we’ll walk you through what your project needs.
When you’re ready for a Master Halco fence done right, call Barrett & Sons Construction Irving at (833) 991-4970 for a free estimate. A live person answers, the price comes to you in writing, and the work is backed by the 90-Day Done Right Promise.
Written by the team at Barrett & Sons Construction Irving, serving Irving and nearby areas.












