







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Windows & Doors in Irving: What to Know First
We install and replace PGT windows and doors in Irving as an independent PGT service provider, and most residential jobs run two to four days from tear-out to final inspection. A full window replacement here usually lands between $4,500 and $15,000 depending on how many openings you’re doing and whether you move into impact glass, which runs higher. We give you a written line-item quote before anything gets ordered, and we don’t quote one number on the phone and hand you another at the door.
This page is for Irving homeowners who already own PGT products, or who are weighing them against the other brands we install. If your PGT units are fogging, sticking, leaking at the sill, or if a patio door has started dragging, you’ll find the real cause and the real cost below. Call us at (833) 991-4970 and a live person picks up, day or night.
How PGT Products Fail – and How We Fix Them
PGT builds a solid product, and most of what we see in Irving isn’t a manufacturing flaw. It’s installation and climate. North Texas swings from 105-degree summers to hard winter freezes in a single season, and that expansion and contraction works on seals, glass spacers and frames year after year. Here’s what actually shows up on our callbacks.
- WinGuard impact windows with fogged or hazy glass. The most common complaint we get on WinGuard units is a cloudy pane that won’t clean off. That’s a failed insulated glass seal, not dirt. The desiccant in the spacer has stopped absorbing moisture, and once the seal breaks there’s no repair for the glass itself. We replace the insulated glass unit and re-set it in the existing frame when the sash is sound, which saves you the cost of a whole new window.
- Aluminum-series sliders that stick or jump the track. PGT aluminum sliding doors and windows are popular on Irving homes built in the 1980s and 1990s, and the rollers underneath take a beating from grit and heat. Homeowners often assume the frame is warped and start pricing a full replacement. Usually it’s worn rollers and a track packed with years of grit. We pull the panel, replace the rollers with a quality aftermarket set, clean and true the track, and the door glides again for a fraction of replacement cost.
- Vinyl frames that bow in summer heat. Dark-colored vinyl in full afternoon sun can soften and bow, especially on west-facing walls, which most Irving homes have. It’s a real Irving-climate reality: a sliding sash that worked in March will drag in August. We check the frame for true and, when the bow is minor, adjust the sash and hardware rather than sell you a window you don’t need.
- Water intrusion at sills and corners. PGT units are only as good as the flashing behind them. We regularly find Irving installs where the original crew skipped proper sill pan flashing, so water tracks in behind the frame during a heavy spring storm and shows up as a stain on your drywall weeks later. We pull the unit, correct the flashing, re-seal the opening and reset the window.
- Failed weatherstripping and hardware on aging units. PGT’s warranty covers the glass and frame; it doesn’t cover worn weatherstrip, latches or handles forever. On older units the seal at the sash goes first, and you feel it as a draft or hear it as a whistle. We use OEM parts where they’re available and quality aftermarket equivalents when they aren’t, and we tell you which one we’re putting in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our PGT Windows & Doors Process
Every PGT job runs the same way, whether it’s one fogged pane or a whole house of impact windows.
- 1
On-site look, not a phone guess. We measure every opening, check the frame for true, and look at the flashing and sill behind the unit. A quote built from a photo isn’t a quote.
- 2
Written scope and line-item pricing. You get the brand, the series, the glass package and the labor spelled out before we order. If a scope change comes up mid-job, it arrives as a written change order before we touch it.
- 3
The parts decision. For repairs we go OEM when the part is available and makes sense, quality aftermarket when OEM is discontinued or priced like a whole new window. We tell you the trade-off and let you decide.
- 4
Install or repair. Permits pulled on eligible jobs, correct sill flashing every time, and the unit set level and plumb. Our crew members have up to 28 years of experience and they carry the Barrett & Sons name.
- 5
The test. We open, close, lock and unlock every window and door, check the weep holes, and confirm the seal before we call it done.
- 6
Cleanup and the 90-Day Done Right Promise. We haul the old units and debris, and every job is backed in writing. If something’s not right, one call brings Tom back.
See the difference
Before
After
Before
After
Before
AfterWhat PGT Windows & Doors Costs in Irving

Real ranges, not phone-book teasers. What you pay depends on the series, the glass, how many openings and whether the frames come out.
- Window replacement (full unit): $4,500 – $15,000 for a typical Irving home job.
- Impact window installation (WinGuard or similar): $8,000 – $25,000, higher because of the glass and the engineering.
- Insulated glass unit swap (one failed pane): usually well under the cost of a full window, and we’ll tell you when that’s the smarter call.
What moves the price: impact versus standard glass, the number of openings, second-story access, and whether the frame is sound enough to keep. We quote it in writing, line by line, and the price you approve is the price on the invoice. Call (833) 991-4970 for a free estimate, no trip charge inside the county.
Why Irving Homeowners Call Barrett & Sons Construction Irving for PGT Work
Tom Barrett publishes his name, his address and his license number – look it up before you sign anything. This isn’t a franchise dispatching strangers from out of state. Tom and his sons are on-site most days, and a live person answers the phone around the clock.
Every eligible job gets permits pulled and inspections signed, because the last contractor most folks used told them permits were optional. Every price change comes in writing before the work happens. And every completed job carries the 90-Day Done Right Promise in writing on the contract: if it’s not right, Tom comes back and makes it right, one call.
We carry PGT alongside Andersen, Marvin, KraftMaid, Kohler, GAF and Master Halco, so you’re not steered to one brand because it’s the only one on the shelf. We install the one that fits your house and your budget.
FAQs

Does PGT’s warranty still cover my windows if someone else does the work? Often yes on the glass and frame, but the warranty can be affected if a non-authorized part is used or the install is done wrong. As an independent PGT service provider, we use OEM parts where available and tell you plainly what a repair does and doesn’t preserve.
Can you repair a fogged PGT window instead of replacing the whole thing? Yes, in most cases. If the sash and frame are sound, we swap the insulated glass unit for a fraction of a full replacement. Call (833) 991-4970 and we’ll tell you which makes sense for your unit.
Should I repair or replace aging PGT windows? Repair when the frame is true and the problem is glass, rollers or hardware. Replace when the frame is bowed, rotted or leaking at the sill. We’ll test it on-site and give you both numbers in writing.
How long does a PGT window or door job take in Irving? A single repair is often a few hours. A full-home replacement typically runs two to four days once materials arrive. Call (833) 991-4970 to schedule your free estimate – estimates are free.
Will the price change once work starts? Not without your say-so. Any scope or price change arrives as a written change order before we touch it. That’s how we’ve worked since 1998, and it’s why folks around here call us back.
Ready to get your PGT windows and doors sorted out? Call Barrett & Sons Construction Irving at (833) 991-4970 for a free estimate, no trip charge inside the county, and a live person on the line whenever you call. We pull the permits, quote it in writing, and stand behind it.
Written by the team at Barrett & Sons Construction Irving, serving Irving and nearby areas.












