







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Irving Homeowners Choose PGT Construction
We provide independent PGT construction service in Irving – repair, replacement, and installation of PGT windows and doors – and we do it knowing how these products actually fail in North Texas heat and hail, not how a brochure says they should perform. We are not authorized by PGT, and we don’t pretend to be. We’re an independent provider that works on PGT every week: WinGuard impact units, Premier vinyl windows, Eze-Breeze porch enclosures, Architectural Series wood-clad and custom aluminum.
Irving makes its own demands on these products. The same heat that shortens concrete cure windows on a driveway job sits on your window glass all summer, and a spring hailstorm off the Elm Fork can test a WinGuard pane the way no lab does. We cover south Irving’s older pier-and-beam ranches and the covenant-controlled streets of Las Colinas and Valley Ranch alike. Call (833) 991-4970 for a free estimate.
Why Trust Barrett & Sons Construction Irving for Your PGT Construction?

Our technicians have up to 28 years of experience, and a good share of it has been spent with PGT units in hand. They know which sash balances fit a Premier Series tilt window, how a WinGuard insulated glass unit is measured and ordered, and why an Eze-Breeze glazing panel cracks at the frame instead of the middle. That’s the kind of familiarity that comes from repetition, not from reading a spec sheet.
We service PGT warranty-safely. Where a unit is still under warranty, we document the failure and the model information before anything is touched, so a seal failure or balance break stays a warranty matter instead of becoming a voided claim. Every eligible job comes with permits pulled and inspections signed, every scope change arrives as a written change order before work proceeds, and every completed job is backed by the written 90-Day Done Right Promise. You’ll get a written line-item quote, not a phone number that changes at the door. Ask anyone on your street, or look up the license number yourself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Irving
PGT builds a solid product. What we see in Irving is the same short list of failures, over and over, and each one has a specific cause worth understanding before you spend money.
- WinGuard Impact Series – seal failure and fogging. The most common call. Years of DFW heat cycling break down the perimeter seal on the insulated glass unit, and you get fog or a hazy film between the panes. Desiccation inside the unit follows. The glass itself is usually fine; the seal is what failed.
- WinGuard aluminum frames – corrosion and blocked weep holes. Aluminum frames on impact units collect grit and debris in the weep holes. Once they clog, water that should drain out backs up and finds its way inside during a heavy spring storm. In Irving’s older corridor near Bear Creek, that intrusion shows up as stained drywall and swollen trim before anyone thinks to look at the window.
- Premier Series – broken sash balances and tilt latches. Vinyl sash balances lose tension with age and heat, so the window won’t stay up. Tilt latches snap, and a sash that won’t lock tight lets air and water past the weatherstripping. Both are small parts with outsized effects.
- Eze-Breeze Vertical 4-Track – brittle, clouded glazing. The vinyl glazing in a porch enclosure takes full UV exposure. Over several Irving summers it clouds, stiffens, and eventually cracks right at the frame where it flexes. It’s a wear item, not a defect.
- Architectural Series – finish and hardware wear. Wood-clad and custom aluminum units show their age at the cladding seams and operating hardware, especially on the west and south faces where the afternoon sun hits hardest.
PGT Parts & Our Repair-vs-Replace Approach

For out-of-warranty PGT units, OEM parts are our first choice. Sash balances, tilt latches, and glazing vinyl are made to fit the frame you already have, and the fit is what keeps a window sealing for years instead of months. When OEM supply is slow or a part has been discontinued, we’ll use a quality aftermarket equivalent and tell you plainly that’s what we’re doing. We don’t claim to stock PGT parts locally; parts are sourced per job based on the model and the failure.
Repair is usually the right call. A PGT window or door in sound structural condition with one failed insulated glass unit or a broken balance is a repair, full stop. We recommend full replacement when seal failure is widespread across the unit, or when the frame is damaged past the point where repair makes economic sense. We’ll show you the difference rather than tell you. Call (833) 991-4970 and we’ll walk your windows with you.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the exact PGT line – WinGuard, Premier, Eze-Breeze, or Architectural – and the failure. Seal failure, balance, latch, glazing, or frame. We check adjacent windows for the same wear pattern, because one fogged unit usually means others are close behind.
- 2
Repair or install. For repair, we measure the unit and order the correct OEM or matched part. For installation, we follow PGT’s flashing and anchoring details for Irving’s storm exposure, not a generic window set.
- 3
Test. We operate every sash and door, check the seal and the lock, and confirm weep holes drain.
- 4
Warranty. We document what was done, keep the model information straight for any remaining PGT warranty, and back our own work with the 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Irving
We handle the PGT lines Irving homes actually have: the WinGuard Impact Series of aluminum impact windows and doors, the Premier Series of vinyl single-hung and sliding windows, the Eze-Breeze Vertical 4-Track porch windows, and the Architectural Series of wood-clad and custom aluminum windows. That covers single-unit glass replacement, full unit replacement, impact window installation, balance and latch repair, porch glazing replacement, and the roof repair that so often follows a hail event that also took out windows. Whatever the model, we service it and we install it, and we don’t tell you it’s stocked when it isn’t.
We Also Service These Brands
We’re not a single-brand outfit. Beyond PGT, we work with KraftMaid cabinetry, Kohler fixtures, GAF roofing, and Master Halco fencing, alongside Andersen and Marvin windows and Belgard and Techo-Bloc hardscape. That breadth means we can look at your whole house honestly and tell you where the PGT work ends and something else begins – and mean it.
FAQs – PGT Construction Service in Irving

No. We are an independent PGT service provider and are not affiliated with, authorized by, or endorsed by PGT. We work on PGT windows and doors because we’ve done it for years and know the products; we don’t claim manufacturer status. If you need warranty work performed by PGT itself, we’ll say so. Call (833) 991-4970 for a free estimate on independent service.
Yes – OEM parts are our first choice for fit and long-term reliability on out-of-warranty units. Sash balances, tilt latches, and glazing vinyl that match the frame last longer than a universal part. When OEM supply is slow or a part is discontinued, we use a quality aftermarket equivalent and tell you upfront. Call (833) 991-4970 and we’ll confirm what your model takes.
Usually, yes. Fog between the panes means the insulated glass unit’s seal failed, not that the window is finished. If the frame and weatherstripping are sound, the failed IGU can be replaced and the window stays. If the frame is corroded or the seal failure has spread across several units, replacement makes more sense. Call (833) 991-4970 for an exact quote – estimates are free.
A broken sash balance is the usual culprit when a Premier window won’t stay up, and a snapped tilt latch or worn weatherstripping is why it seals poorly. Heat and age do it. Both are small parts and both are fixable without replacing the window. Call (833) 991-4970 to schedule a free estimate.
The vinyl glazing in an Eze-Breeze Vertical 4-Track enclosure clouds and stiffens under sustained UV, then cracks at the frame where it flexes. It’s a wear item. Replacing the glazing panels restores the porch without touching the frame. Call (833) 991-4970 and we’ll size the panels for your enclosure.
Yes. PGT units, WinGuard especially, rely on correct flashing and weep-hole drainage to shed water during heavy spring storms. Install them poorly and the impact glass is fine while the wall around it gets wet. We follow the manufacturer’s flashing and anchoring details on every install. Call (833) 991-4970 for a free estimate.
It depends on the scope, and we quote line by line so you can see why. Typical Irving ranges:
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
Call (833) 991-4970 for an exact quote – estimates are free, and you get a written line-item number, not one that moves after the crew shows up.
Book Your PGT Service in Irving, TX
A sash that won’t stay up or fog between the panes is worth fixing before it spreads to every window on that wall. Call Barrett & Sons Construction Irving at (833) 991-4970 for a free estimate. We service PGT WinGuard, Premier, Eze-Breeze, and Architectural units across Irving, pull permits where needed, put every scope change in writing, and back the work with our 90-Day Done Right Promise.
Written by the team at Barrett & Sons Construction Irving.












