







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Irving Homeowners Choose Toto Construction
We provide independent Toto construction and repair service in Irving, TX, for homeowners who already own a Toto fixture and want it handled by someone who works on these toilets every week. What makes our Toto work different is that we treat the fixture as a system: fill valve, flush valve, glazed trapway, wax ring and closet flange, matched to North Texas water and the specific bathroom being remodeled around it. We are an independent contractor, not affiliated with or authorized by Toto. Call (833) 991-4970 and a live person picks up, day or night.
Why Trust Barrett & Sons Construction Irving for Your Toto Construction?

Toto fixtures reward a careful hand. The Ultramax II (MS604114CEFG) one-piece elongated toilet is set and sealed differently than a two-piece Drake (CST744S / CST746) comfort-height model, and the builder series Clayton (CST774) and Promenade (CST724) each run their own tank internals. Our crews have up to 28 years of experience with these fixtures, and that shows up in the parts we reach for. We source genuine Toto fill valves, flush valve gaskets, seat hinges and Washlet components because aftermarket tank parts often change flush volume and undo the toilet’s performance reputation in a single afternoon.
We keep the service warranty-safe. Nothing we do to a Toto fixture involves cutting, drilling or modifying the bowl or tank body, and we never mix an aftermarket flush tower into an OEM tank. Every scope, every allowance and every price change comes as a written change order before work happens. That’s how we’ve run for over 29 years, founded 1998, owner-operated from day one. If a repair turns out more involved than the estimate suggested, you’ll see it in writing before we lift a tool.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Irving
Irving’s water runs hard, and Toto fixtures show it. These are the calls we get most often in Dallas County bathrooms.
- Continuous running or phantom flushing in Ultramax II and Drake tanks. Usually the fill valve (TSU13A) has worn or a flush valve gasket no longer seals against the tank outlet. A toilet that runs for a minute every half hour is often a slow leak past the flapper gasket, not a phantom.
- Weak or dead Washlet spray. The C200/C100 electronic bidet seat pulls water through a small inlet filter, and hard-water mineral buildup on that filter and the nozzles is the most common cause of a spray that fades. Cleaning the nozzle externally won’t fix it if the inlet screen is scaled.
- Repeat clogs from glazed trapway scale. The glazed trapway and rim jets pick up mineral scale in hard-water areas, narrowing the flush path. Owners who start plunging weekly usually have scale, not a user issue.
- Wax-ring and seal-ring leaks under one-piece Ultramax bodies. One-piece toilets need the closet flange perfectly aligned. When it isn’t, the wax ring fails quietly and you get a stained subfloor under fresh tile.
- Washlet control panel and pump failures. Mineral buildup on internal seals accelerates pump wear, and a panel that won’t hold a setting often points to moisture intrusion at the seat connection rather than a dead board.
A typical Toto job in an Irving ranch home starts with a Drake or Ultramax II that runs intermittently. The culprit is usually a worn TSU13A fill valve or a flush valve gasket that no longer seals. A qualified local pro shuts off the supply, drains the tank, swaps the valve and gasket with genuine Toto parts, checks the refill tube height and confirms the water level before testing several flushes. If that same bathroom is being remodeled, the pro also replaces the wax ring and closet bolts while the floor tile is open, so you don’t tear the job apart twice.
The clay and cast-iron reality in south Irving’s older pier-and-beam homes changes the math here. When a cast-iron sewer line is failing under a pier-and-beam floor, that’s a hidden cost that surfaces mid-remodel, and we flag it before demolition rather than after. In the Las Colinas and Valley Ranch corridor, the strict HOA design covenants shape which Toto finishes and fixtures fit the approved look.
Toto Parts & Our Repair-vs-Replace Approach

We don’t overclaim on parts. We source genuine Toto fill valves, flush valve gaskets, seat hinges and Washlet components per job rather than promising a local stock no independent contractor honestly keeps. The reason matters: aftermarket tank parts frequently change flush volume, and a Toto that flushes poorly after a “cheap” repair is a toilet you’ll replace sooner.
The honest call on repair versus replace usually looks like this. A 10-plus-year-old Toto bowl can be perfectly sound while the valve, seat, flush gasket and wax ring are tired. In that case a focused parts-and-seal repair beats replacing the whole fixture during a bath remodel. We replace the fixture only when the bowl, glaze or trapway is genuinely failing. Call (833) 991-4970 and we’ll give you a free written second opinion on any estimate before you commit.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We pull the tank lid, check the TSU13A fill valve and flush gasket, then trace the symptom (running, weak flush, leak) back to the real cause instead of guessing at a washer.
- 2
Repair or install. We swap OEM Toto parts, reset the refill tube height and water level, and align the closet flange and wax ring correctly on one-piece units.
- 3
Test. Multiple full flush cycles, a refill check, a leak check at the base and a Washlet function check if a bidet seat is involved.
- 4
Warranty and paperwork. Written change order for anything beyond the original scope, and every completed job backed by our written 90-Day Done Right Promise. One call brings us back. Nothing is buried in fine print.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Irving
We service and install the Toto families that show up in Irving bathrooms. That covers the Ultramax II (MS604114CEFG) one-piece elongated toilet, the Drake (CST744S / CST746) two-piece comfort-height model, the Clayton (CST774) and Promenade (CST724) builder series, and the Washlet and C200/C100 electronic bidet seats. We handle the tank internals for each of these (fill valves, flush gaskets, seat hinges) and the Washlet electronics when the spray fades or a control panel stops holding a setting. We don’t publish what we stock, but we source the right genuine part for the model, because a wrong-fit valve on a Toto is a running toilet waiting to happen.
We Also Service These Brands
Barrett & Sons Construction Irving is not a single-brand shop. We also work with KraftMaid and Kohler in kitchens and baths, GAF on roofing, and PGT on windows and doors. That means a Toto toilet and a Kohler vanity can be planned into the same bathroom remodel without handing the job to two contractors and two schedules. One crew, one written scope, one set of change orders.
FAQs – Toto Construction Service in Irving

Yes. A worn TSU13A fill valve is a repair, not a reason to replace an Ultramax II. We swap the valve with a genuine Toto part, check the refill tube height and water level, and test several flushes. You keep the bowl and tank you already paid for. Call (833) 991-4970 for a free estimate.
Usually the inlet filter screen is scaled with minerals, not the nozzle. Hard Irving water builds up on that small screen and starves the spray, so external nozzle cleaning won’t restore pressure. We flush the inlet and clear the screen as part of a Washlet service. Call (833) 991-4970 to get it looked at.
Often, yes. A Clayton (CST774) with a sound bowl and tired internals is usually worth keeping, and we replace the valve, gasket and wax ring instead. If the bowl or trapway is failing, we’ll tell you straight. Call (833) 991-4970 for a free second opinion on keeping versus replacing.
It usually does, but the set is where leaks start. Older south Irving homes with pier-and-beam floors can have a misaligned or low closet flange, and a one-piece Ultramax II needs it aligned correctly or the wax ring fails. We check the flange before installation and flag any issue in writing. Call (833) 991-4970.
Yes. We source genuine Toto fill valves, flush gaskets, seat hinges and Washlet components for these fixtures. Aftermarket tank parts often change flush volume and undo the performance Toto is known for. Parts are confirmed per job, with the price in writing. Call (833) 991-4970 for an exact quote.
It depends on whether it’s a repair or a full remodel. A focused Toto repair (valve plus wax ring) is far less than a remodel; the remodel ranges below are for the whole room, Toto work included.
| Job | Typical Range in Irving |
|---|---|
| Bathroom Remodel | $9000 – $28000 |
| Small Bathroom Remodel | $5000 – $12000 |
| Bathroom Vanity Installation | $800 – $3000 |
| Walk-In Shower Installation | $4500 – $12000 |
Every price change arrives as a written change order before work proceeds. Call (833) 991-4970 for an exact quote; estimates are free.
Book Your Toto Service in Irving, TX
If your Toto is running, spraying weak, or you’re planning a bathroom remodel around it, we can help. Barrett & Sons Construction Irving pulls permits, puts scope and allowances in writing, and backs every job with our written 90-Day Done Right Promise. Call (833) 991-4970 to schedule your free estimate.
Written by the team at Barrett & Sons Construction Irving.












