







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCountertop Installation Cost in Irving, TX: What You’ll Actually Pay
Countertop installation in Irving runs $2,000 to $6,500 for most kitchens, and the number that lands closest to the top of that range usually involves a large island in Las Colinas or Valley Ranch where the slab has to be seamed. Slab material, the number of slabs your layout needs, edge profile, and tearout of the old top drive the total. We walk every homeowner through the templating layout before a saw touches stone, and we put every line in the written estimate before work starts. For an exact quote, call (833) 991-4970.
Key takeaways
- Most Irving countertop jobs land between $2,000 and $6,500, and a full kitchen remodel that includes new tops runs $14,000 to $45,000.
- A 10-foot island almost always needs a seam. Where that seam falls is decided before fabrication, not after.
- Cambria quartz comes with published thickness, edge and warranty specs you can compare line-for-line against any other quote.
- Tearout, sink cutout, faucet holes and undermount support are itemized as separate lines, not folded into a single lump number.

Why the seam matters more in an Irving kitchen than most pricing guides admit
Here’s the thing slab-pricing charts leave out. A 10-foot island in a Las Colinas kitchen almost certainly requires a seam in the countertop. Where that seam falls relative to the stone’s pattern is a fabrication decision that happens before the slab is cut, and changing your mind after costs you a slab. That’s real money.
The 1980s through 2000s homes in Las Colinas and Valley Ranch were built with large open-plan kitchens, wide islands and peninsulas. Those layouts eat slab square footage fast. A single slab typically won’t cover an island that size plus the perimeter, so you’re looking at two or more slabs and at least one visible seam. Plan the seam well and you waste less stone. Plan it badly and you buy material you never see. We sit down with you and the templating layout before fabrication so the seam lands where the pattern hides it and where the waste is smallest.
South Irving is a different story. The 1950s-70s ranch homes down there often have smaller, galley-style kitchens where a single slab covers the whole run. Fewer seams, lower material cost, but you may run into surprises the moment we pull the old top: out-of-square cabinet boxes, sagging substrate, or a sink that was set with a bead of caulk instead of proper undermount support. We plan for that in the estimate rather than finding it mid-job.
What’s included in a Barrett & Sons countertop quote
Every countertop estimate breaks the job into visible line items, so nothing shows up as a mystery labor charge at the end. Here’s what we itemize:
- Tearout and disposal of the existing countertop
- Sink cutout and faucet hole drilling (undermount sinks get proper support brackets, not just adhesive)
- Edge profile fabrication and polishing
- Slab material, with the actual brand and color named
- Template, fabrication, delivery and install labor
- Backsplash pieces if you’re adding them (backsplash alone typically runs $800 to $2,500)
We install Cambria quartz as our standard quartz line, and we say that for a reason. Cambria publishes its thickness options, edge profiles, and warranty terms. That means you can hold our quote next to any competitor’s and compare exactly what’s being sold. “Granite-look quartz” from an unnamed vendor is not the same product at the same price, and you deserve to know which one you’re buying. We also set Blanco and Delta fixtures on plenty of these jobs if you want the sink and faucet quoted on the same page as the stone.

Countertop installation cost in Irving, by line item
These are market-calibrated ranges for Irving kitchens. Your actual number depends on slab choice, layout, and how many seams your island forces.
| Item | Typical Range |
|---|---|
| Countertop installation (standard kitchen) | $2,000 - $6,500 |
| Backsplash installation | $800 - $2,500 |
| Kitchen island installation | $3,000 - $10,000 |
| Cabinet installation (if you’re replacing boxes first) | $4,000 - $13,000 |
| Small kitchen remodel (tops included) | $9,000 - $20,000 |
| Full kitchen remodel (tops included) | $14,000 - $45,000 |
That $2,000 to $6,500 range for countertop installation is the honest spread. A modest single-slab laminate-to-quartz swap sits near the bottom. A two-slab seamed island in a Valley Ranch kitchen with a waterfall edge sits near the top. The full Kitchen Remodeling scope is where tops usually get bundled with cabinets and plumbing, and where the $14,000 to $45,000 range applies. If your project is pulling cabinets too, our Kitchen Remodeling in Irving page covers the full sequence.
Outdoor kitchens in Valley Ranch: a climate question, not a looks question
Valley Ranch backyards with pools often come with an outdoor kitchen, and that’s where Irving’s weather turns material choice into a functional decision. Summers hit 100°F and the occasional hard freeze rolls through. Stone that expands and contracts differently than its substrate will crack at the seam or pop loose over freeze-thaw cycles. We match outdoor tops to material rated for exterior use and account for thermal movement at the joints. Picking the wrong slab for an outdoor run saves money up front and costs more when it fails.
Each job is backed by the written 90-Day Done Right Promise. If a seam opens, an edge chips during the cure period, or the caulk at the backsplash joint fails, one call brings us back to make it right. That’s a promise on a local contract, not a fabricator warranty hotline in another state.
Common local scenarios we see in Irving
Las Colinas and Valley Ranch open-plan islands. Large islands and peninsulas frequently need two or more slabs and a visible seam. We plan the seam placement around the stone pattern before fabrication so the waste is minimized and the seam disappears into the veining.
South Irving ranch homes. Smaller kitchens, but older cabinet stock. We often find the counter substrate out of level or the sink under-mounted with nothing but caulk. The estimate accounts for that repair rather than treating it as a change order.
Outdoor kitchens near Valley Ranch pools. Material selection has to account for thermal expansion and freeze-thaw. We steer those jobs toward exterior-rated surfaces.
Full remodels in the Las Colinas corridor. HOA architectural reviews in the master-planned communities mean finishes have to clear review before install, and we build that timing into the schedule.
Why homeowners here call Barrett & Sons
Barrett & Sons Construction Irving is owner-operated, and our technicians have up to 28 years of experience on kitchen and countertop work. Every eligible job pulls permits and signs off inspections in writing. Every scope change gets a written change order before it touches the job, so you don’t get a surprise invoice at the end. If you’ve paid for a written estimate somewhere else and want a second set of eyes on it, we’ll give you a free second opinion. And a live person answers the phone, not a call center. Keep the standing offers in mind: $40 off any repair over $200, no trip charge inside the county, and a permanent 10% senior and veteran discount.
FAQs about countertop installation cost in Irving
Most Irving countertop installation jobs run $2,000 to $6,500, with material and seam count being the biggest swing factors. A single-slab galley kitchen sits near the low end; a two-slab seamed island in Las Colinas or Valley Ranch sits near the high end. Call (833) 991-4970 for an exact quote, and estimates are free.
Repair is cheaper when the damage is a chip, a failed caulk joint, or one loose section, and replacement is the smarter spend when the substrate is failing, the seams are opening repeatedly, or you’re already replacing cabinets. We’ll tell you which side of that line you’re on after we look at it. Call (833) 991-4970 and we’ll give you the straight answer.
Usually not on a 10-foot island, because a standard slab won’t span that length. What we can do is plan the seam placement around the stone’s pattern so it reads as part of the design rather than an afterthought. That planning happens at templating, before fabrication, and changing it afterward costs you a slab. Call (833) 991-4970 to book a templating walkthrough.
Countertop swaps alone typically don’t need a permit, but when the job includes plumbing relocation or part of a larger kitchen or bathroom remodel, permits get pulled and inspections signed. We tell you in the written estimate which applies. Call (833) 991-4970 to talk through your project.
Get a written countertop estimate this week
If you’re pricing out a new countertop in Irving, we’ll put the slab, the seam plan, the tearout, and every line on paper before anything is cut. Free estimate, no trip charge inside the county, and a live person on the phone. Call (833) 991-4970 to schedule yours, or start with our home page to see the rest of what we do.
Written by the team at Barrett & Sons Construction Irving, serving Irving, TX.
What Our Customers Say
"Addition over the garage matched the original roofline and brickwork so closely that visitors do not realise it was added. He tracked down the closest brick he could find rather than settling."
- Gideon Stroud"The bathroom was finished on the day he said at the start, which nobody had led me to believe was possible."
- Loretta Vanterpool"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."
- Redmond Cavanaugh












