







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterQuartz & Granite Countertops in Irving, TX
Quartz and granite countertops in Irving typically run $55 to $95 per square foot installed for quartz and $50 to $90 per square foot installed for granite, with most full kitchen replacements landing between $3,200 and $6,800. The stone itself is only part of that number – templating, edge profiles, sink cutouts, and tear-out of the old top all move the price. We set quartz and granite for homeowners across Irving who want a counter they can measure and verify, from a crew they’ll see again at the hardware store. Call (833) 991-4970 and a live person picks up, day or night.
This page sits under our Kitchen Remodeling service, because a counter never lives alone. It meets a backsplash, a sink, a cooktop, and cabinet boxes that need to be level before a slab ever arrives. If the cabinets are tired, the counter will show it within a year. We’d rather tell you that now than after the stone is glued down.
Key Takeaways
- Quartz and granite both install over solid, level cabinets. If the bases are soft or out of square, we flag it before templating.
- Every scope, every allowance, and every price change arrives as a written change order before work starts.
- Permits get pulled and inspections get signed on every eligible job, because the last crew most folks used told them permits were optional.
- Every completed job is backed by our written 90-Day Done Right Promise. One call brings us back.

When You Need Quartz & Granite Countertops
Irving homeowners call us about counters for reasons that repeat. Here’s what we hear most.
- The laminate is lifting at the seams. In the older ranch homes near downtown Irving, we regularly see 1990s laminate curling at the sink edge after years of North Texas humidity swings. Once water gets behind it, the particleboard core swells and the top never sits flat again.
- You’re replacing cabinets and the old top won’t survive. A counter comes off in pieces more often than not. If new KraftMaid or Wellborn boxes are going in, the stone gets templated after they’re set, not before.
- You want a surface that handles heat and hard use. Granite shrugs off a hot pan set down without a trivet. Quartz is tougher against stains and doesn’t need sealing, but it dislikes direct high heat. We’ll tell you which fits how you actually cook.
- The counter is too shallow or the overhang is wrong. Bar seating in a Las Colinas condo or a breakfast bar in a Valley Ranch kitchen often needs a deeper overhang than the existing top provides. That’s a build decision, not just a stone swap.
- A crack formed around the sink cutout. Cutouts are the weak point on any stone top. A crack there usually means the original fabrication was thin at the edge, and it’s time for a new top.
- You’re selling or updating before a move. A clean quartz top reads as a cared-for kitchen to buyers, and it’s one of the few upgrades that photographs well and holds up to daily scrubbing.
Our Quartz & Granite Countertops Process
Stone work has an order to it. Skip a step and you get a top that doesn’t fit, or a seam you’ll stare at for the next fifteen years. Here’s how we run it.
- Walk the kitchen and measure. We look at cabinet level, sink and cooktop locations, appliance openings, and where the seams would land. We talk through quartz versus granite honestly, including the tradeoffs on heat, sealing, and stain resistance.
- Put the scope in writing. Stone type and slab selection, edge profile, sink cutout, backsplash height, tear-out and haul-away. Every allowance is on paper before you commit. An allowance that isn’t on paper is a surprise waiting for a date.
- Order the slab and template. Once the cabinets are set and level, we template the actual space. Templating after install is what separates a tight fit from a counter with gaps you’ll caulk forever.
- Fabricate and set the stone. The slab gets cut, edges get polished, and the top gets set with the sink and cooktop openings in the right spots. Seams land where we agreed.
- Pull permits and pass inspection where eligible. The permit inspector works for you, not for us, and that’s exactly why we like him. Any inspection the job calls for gets signed before we call it done.
- Walk it with you and back it in writing. We check seams, edges, and the sink seal together. Every completed job gets the 90-Day Done Right Promise on the contract – not buried in fine print. If it’s not done right, one call brings us back.
Our crew members have up to 28 years of experience setting stone and working kitchens, and they carry the Barrett & Sons name on every visit. No strangers dispatched from a call center. If you’re planning the whole kitchen, start with the home page to see how the trades fit together.

Quartz & Granite Countertops Pricing in Irving
Here’s what Irving homeowners actually pay, as ranges rather than a phone-quote number that changes at the door. The range depends on slab selection, square footage, edge detail, and how much tear-out is involved.
| Line Item | Typical Range |
|---|---|
| Quartz, installed (per sq ft) | $55 – $95 |
| Granite, installed (per sq ft) | $50 – $90 |
| Standard edge profile (eased or bullnose) | $8 – $20 per linear ft |
| Undermount sink cutout and mount | $150 – $350 |
| Cooktop cutout | $100 – $250 |
| Tear-out and haul-away of old top | $150 – $400 |
| Full kitchen replacement (typical) | $3,200 – $6,800 |
What moves the price up: a premium slab, a decorative edge like a large ogee, a waterfall side on an island, tight seam placement on a long run, and cabinets that need leveling first. What keeps it down: a straightforward layout, stock-edge profiles, and reusing the existing sink if it’s sound. We quote from a measured space, not a guess over the phone, and we don’t hand you a different bill when we show up. Requests that change the scope get a written change order before any work touches the job.
Ask about our published offers: $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% Senior & Veteran discount. Estimates are free, and a live person answers the phone to book one.
Does quartz or granite cost more in Irving?
Granite usually comes in a little cheaper than quartz at the entry level, roughly $50 to $90 per square foot installed versus $55 to $95 for quartz. The gap narrows fast when you pick a premium quartz slab. Granite needs periodic sealing; quartz doesn’t. But quartz handles stains and everyday scrubbing with less fuss, and many Irving homeowners pick it for that alone. The right call is about how you cook and clean, not just the line item. Call (833) 991-4970 for an exact quote on the slab you’re considering – estimates are free.
How long does a countertop replacement take?
Most quartz and granite replacements take about one to two weeks from templating to set, with the install itself usually done in a single day. The wait is mostly slab lead time and fabrication. If the cabinets are being replaced first, we template only after the new boxes are set and level, which adds to the timeline but protects the fit. We’ll give you the real schedule in writing before we start.
Can you set the counter over my existing cabinets?
Yes, as long as the cabinets are solid and level. We check for soft spots, water damage around the sink, and out-of-square boxes during the walk-through. A stable, level cabinet run is the whole foundation a stone top needs. If something’s off, we flag it and quote the fix in writing before templating, so there’s no surprise mid-job. Call (833) 991-4970 and we’ll take a look.
Is a permit needed to replace a countertop?
Usually not for a straight stone swap, but it depends on what else the job touches. If we’re moving plumbing, adding electrical for an under-cabinet outlet, or altering structure around the sink or cooktop, permit requirements can apply, and we pull them on eligible jobs. We’d rather check than guess, because the last contractor many customers used told them permits were optional. Ask us and we’ll tell you straight. A free second opinion on any written estimate is one call away.
Ready to put a counter you can measure and verify on your Irving kitchen? Call (833) 991-4970 for a free estimate. A live person answers 24 hours a day, and we’ll walk your kitchen, talk stone honestly, and put the whole scope in writing before anything moves.
Written by the team at Barrett & Sons Construction Irving, serving Irving.


