







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Irving Homeowners
If your Irving windows fog up between the panes, your patio door drags on the track, or your front door lets in a draft you can feel from the hallway, you’re dealing with more than a nuisance. North Texas heat pushes cheap glass hard, and a single failing seal can cost you real money on your summer electric bill. Our crew members have up to 28 years of experience installing and replacing windows and doors across Irving. We pull the permit, we put the scope in writing, and we stand behind the finished job with our written 90-Day Done Right Promise. Call (833) 991-4970 to schedule your free estimate.
What Our Windows & Doors Service Includes

Window Installation
Window installation covers new openings and rooms where glass has never been, including additions and sunrooms. You need it when you’re building, finishing an enclosed space, or adding a window to a wall that has none. We frame the opening, flash it correctly for Irving’s wind-driven rain, and pull the inspection on any eligible job so you know it was done to code.
Door Installation
Door installation means setting a new exterior or interior door in a new or existing opening, from entry doors to hinged patio and garage doors. You need it after storm damage, when a door frame has rotted, or when you’re changing sizes during a remodel. We measure the rough opening ourselves, install hardware and seals, and confirm the door closes square before we call the job done.
Window Replacement
Window replacement swaps failing or outdated units for new ones in the same opening, usually without touching the surrounding drywall. You need it when seals break, frames rot, or a unit no longer opens and closes smoothly. We handle classic Dallas County ranch and mid-century homes where the original aluminum frames have finally given up, and we write the replacement scope in writing before any glass comes out.
Impact Windows & Doors
Impact windows and doors use laminated glass and reinforced frames built to stay intact under hail and flying debris. You need them if you’re tired of taping up windows or hauling plywood ahead of every spring storm. We install units rated for the loads our area sees, and every eligible install is permitted and inspected.
Energy-Efficient Windows
Energy-efficient windows bring low-E coatings, insulated glass, and tighter frames to cut summer heat gain and winter drafts. You need them when rooms are hard to cool, glass sweats, or your utility bill climbs every July and August. We match glazing to the way your Irving home faces the sun rather than selling one spec to everyone.
Sliding & Patio Doors
Sliding and patio doors open a wall to the yard or patio, and include energy-efficient and hurricane-rated slider options. You need one when an older slider jumps the track, locks fail, or you want more light and better access to an outdoor space. We level the track, install a screen that actually rolls, and check the seal under a running hose before we finish.
Every window and door project is a real construction job, not a one-hour fix. Expect an honest timeline, a scope in writing, and a crew that cleans up when the work is done. Material options like James Hardie trim and KraftMaid interior finishes are available when the project calls for them, so the finished product holds up instead of getting patched twice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We install Andersen windows, and we know where they hold up and where they wear first. Their clad wood and composite lines handle Irving heat well when flashed right, and most problems we see trace back to installation details rather than the window itself. We also install Marvin windows, a brand with strong reputations on custom and geometric units where the fit has to be exact. If a homeowner wants a specific line, we’ll quote it. If they don’t, we’ll help them compare real options instead of steering them to whatever is easiest to sell.
On trim and finish work, James Hardie fiber cement is our go-to around windows and doors because it resists moisture and doesn’t crack like wood does through North Texas freeze-thaw cycles. KraftMaid door and cabinetry finishes come up when interior door projects tie into a larger room update. And when a project touches a shed or detached structure, we’ll work alongside whatever Tuff Shed built so things line up. Whether you have Andersen, Marvin, or any other make, we can help.
Signs You Need Windows & Doors Right Now
- Condensation or fog between the panes. That’s a failed seal letting moisture into the glass unit. The window still blocks wind, but its insulating value is gone, and your AC works harder all summer.
- Drafts around the frame or under the door. You can feel outside air on a cold morning or watch a candle flicker near a closed door. Drafts mean weatherstripping, caulk, or the whole unit has aged out, and heat loss adds up fast in an Irving home.
- Doors that stick, drag, or won’t latch. A door that fights you is either swelling from moisture, out of square, or sitting in a frame that has shifted. Left alone, it warps further and can let water in at the threshold.
- Visible rot, soft wood, or cracked glass. Push a screwdriver into the frame near the sill and it sinks in, or you spot a chip spreading across the glass. Rot spreads, and cracked glass can fail completely in the next hailstorm.
- A slider that jumps the track or locks that won’t catch. A patio door that won’t lock is an open invitation, and one that jumps its track can bind and break the rollers. Both are fixable, but not something to put off.
Our Windows & Doors Process – Step by Step
- 1
Free in-home estimate. We walk the house, measure each opening, and look at how the existing windows and doors are flashed and sealed. You get a written, line-item estimate, not a price scrawled on a business card. No trip charge inside the county.
- 2
Scope and options in writing. You choose the glass, frames, and hardware, and every choice is on paper before we order. Any allowance is written into the scope, because an allowance that isn’t on paper is a surprise waiting for a date.
- 3
Permits pulled and materials ordered. On any eligible job, we pull the permit and schedule materials around your install date. If the scope changes after we’ve started, you get a written change order before the work happens.
- 4
Installation by our own crews. Our crew members set and flash each unit, check level and plumb, and confirm every window and door opens, closes, and locks correctly. The permit inspector works for you, not for us, and we like it that way.
- 5
Final walkthrough and the 90-Day Done Right Promise. We walk the job with you, sign the inspection on eligible work, and leave the written promise on every contract. If something isn’t right, one call brings us back to fix it.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Irving?

A typical window replacement in Irving runs $4,500 – $15,000 depending on how many units you’re replacing, the frame material, and the glass package. Energy-efficient upgrades and larger sliders push toward the higher end because the glass and hardware cost more. Impact window installation runs $8,000 – $25,000 depending on count and rating, and the value shows up both in storm protection and resale. Door installation costs vary with the door itself, whether it’s a standard entry door or a wide patio slider.
What moves the price: the number of openings, frame material and glass choice, whether the opening needs repair or reframing, and whether you’re adding new openings versus replacing in place. We give you a written, line-item quote so you can see where the money goes. To avoid overpaying, compare brands and compare the scope, not just the bottom line, and ask whether permits are included. Every free estimate from us spells out what’s covered and what isn’t, so you can compare apples to apples. Our standing offers include $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount.
Windows & Doors Near Irving – Our Service Area
We work throughout Irving and the surrounding towns, including our Irving service area, plus Euless, Coppell, Grapevine, Bedford, Grand Prairie, Hurst, Colleyville, Southlake, and Lewisville. Most estimates get scheduled within a few days, and installs are planned around your calendar, not ours. If you’re nearby in our Euless service area or Coppell service area, it’s the same crew and the same written scope.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Irving

It covers the supply and installation of windows, exterior and interior doors, patio sliders, and impact-rated units for your Irving home. That means measuring the opening, ordering the right glass and frame, flashing and sealing it, and handling the permit and inspection on eligible jobs. It’s construction work that requires exact measurements and correct flashing, which is where most failed installs go wrong. We handle the whole scope and put it in writing before we start.
A single door or a handful of windows is usually a one-day job; a whole-house replacement typically takes a few days depending on the number of openings and any framing repair. Special-order glass and custom geometric or impact units can add lead time before the install date, so we order early. We give you a realistic schedule with the estimate, not a guess, and we tell you up front if a custom piece pushes the timeline.
Window replacement in Irving typically runs $4,500 – $15,000, while impact windows run $8,000 – $25,000 depending on count, frame, and glass rating. Door installs vary with the door type and whether the opening needs repair, and single window replacements sit at the low end of the range. Call (833) 991-4970 for an exact quote, because estimates are free and no trip charge applies inside the county.
Yes, we install and service Andersen and Marvin windows and doors, along with James Hardie trim work that surrounds them. We know how these units wear in North Texas heat and wind, and how to flash them so they last. On top of that, whether you have Andersen, Marvin, or any other make, we can help.
Call (833) 991-4970 and a live person answers around the clock, not a voicemail box or an out-of-state call center. We can talk through whether it’s a temporary fix or a full replacement and get you on the schedule. For a broken pane or a door that won’t secure, we’ll help you get it safe first. Planned installs are scheduled, so we won’t promise a same-day remodel that nobody can deliver.
Every completed job is backed by our written 90-Day Done Right Promise, and we don’t bury it in fine print. If something isn’t right, one call brings us back to make it right, no argument. Manufacturer warranties on the units themselves come with each product, which is another reason to install named brands you can look up.
Clear the area around each window and door, move furniture and breakables back a few feet, and take down blinds or curtains we’d need to remove anyway. Our crew lays drop cloths and covers floors, but clearing the path makes the day run smoother. Plan for some noise and make sure someone is home for the final walkthrough at the end.
Schedule Your Windows & Doors Service in Irving Today
Call (833) 991-4970 and a live person will set up your free, no-obligation estimate for windows or doors in Irving. We’re licensed and insured, we pull every eligible permit, and we answer the phone around the clock. Ask anyone on your street, or look up the license number yourself. We’ll walk the house, put the scope in writing, and give you a price you can plan around.
Written by the team at Barrett & Sons Construction.












