







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Irving Homeowners
Most fence failures in Irving show up along the bottom rail and the posts, not the pickets. Our technicians have up to 28 years of experience setting posts in Irving’s expansive clay soil, and we know why that matters here: this ground swells when it’s wet and shrinks when it dries, and a post that isn’t set below the active soil layer will walk its way out within a few seasons. We build fences that stay put. Every eligible job gets permits pulled and inspections signed, every price change arrives as a written change order before we touch the job, and all of it is backed by our 90-Day Done Right Promise. Call (833) 991-4970 and a live person answers, day or night.
Barrett & Sons Construction is owner-operated, founded in 1998, and we’ve been serving local communities for over 29 years. Irving sits in one of the toughest soil and wind belts in North Texas, and our estimates reflect how we actually build here – not a template from a national call center.
What Our Fence Installation Service Includes
We handle the full span of fencing work a homeowner in Irving is likely to need, from a single gate repair on a Tuesday to a full perimeter build on a corner lot. Here’s what each one covers.
Wood Fence
Cedar and treated pine privacy fencing is still the most common fence in Irving neighborhoods, and for good reason: it’s repairable, it looks right with the brick and stone homes here, and it ages honestly. You need a new wood fence when pickets are cupping, posts are leaning, or the run has been patched so many times it no longer lines up. We set posts in concrete below the frost and active-soil line, brace corners properly, and use galvanized fasteners that won’t bleed rust stains onto the boards within a year. If you have a James Hardie-sided home, we’ll match the fence height and cap style so the two lines read clean from the street.

Chain Link Fence
Chain link is the practical choice for side yards, pet runs, and any property line where security and visibility both matter. You need it when a dog keeps testing the perimeter, when the existing chain link has rusted through at the bottom tension wire, or when a commercial lot needs a clear boundary. We install galvanized and vinyl-coated chain link with concrete-set posts and proper tension bands, and we can add privacy slats if you want the run to stop being see-through.

Vinyl Fence
Vinyl fencing holds up to Irving’s summer heat and UV without needing stain or paint, which is why we install a lot of it on newer builds and on rental properties. You need vinyl when you want a low-maintenance run that still gives a clean privacy line, or when an older wood fence has reached the end of its repairable life. A typical vinyl fence installation in Irving runs between $3,500 and $9,000 for most residential yards. We use reinforced bottom rails and posts designed for wind exposure, because a hollow vinyl post in North Texas wind is a short-lived post.

Aluminum Fence
Aluminum is the go-to for pool enclosures, front-yard decorative runs, and anywhere you want a defined boundary that doesn’t block the view. You need it when HOA rules cap fence height in the front yard, or when you want the security of metal without the maintenance of iron. Aluminum fence installation in Irving usually lands in the $4,000 – $10,000 range depending on linear footage, gate count, and whether the grade is level. We powder-coat finish and rack the panels over slopes so the top rail follows the ground instead of stepping like a staircase.
Iron Fence
Wrought and ornamental iron gives a property a formal edge that nothing else matches, and it’s what you want on the front of a custom home or a lot facing a main road. You need iron when durability and appearance both have to be permanent, and when you’re willing to keep up with occasional touch-up painting. We handle fabrication and install on gates, fence panels, and driveway entrances, set in concrete with hardware that won’t sag under its own weight.
Fence Repair
A lot of the fence work we do in Irving is repair, not replacement, and we’ll tell you honestly which one you actually need. You need repair when a handful of posts have heaved, a gate has dropped, or storm debris has taken out a section. We diagnose the posts first – if the soil has pushed them, replacing pickets alone just hides the problem for a season. Ask about our $40 Off Any Repair Over $200 standing offer when you call.
Privacy Fence
A privacy fence is a design decision as much as a construction one, and in Irving that means thinking about height limits, HOA rules, and how the fence handles a sloped lot. You need one when a neighbor’s second story now looks straight into your backyard, or when a pool or patio needs screening. We build six-foot and eight-foot runs with board-on-board or shadowbox construction depending on which way you want the good side to face.
Fence Gates
Gates are where most fences fail first, because a gate is a moving part carrying the same weight as a static panel. You need a new or rebuilt gate when it’s dragging, not latching, or the hinge post has started to lean. We build gates with a proper diagonal brace and a welded or bolted frame, then hang them on heavy-duty hinges rated for the gate’s weight.
Commercial Fencing
Commercial fencing around an Irving business or lot has to hold up to traffic, code requirements, and, often, insurance scrutiny. You need it for dumpster enclosures, parking perimeters, job-site security, and property-line definition. We handle the permitting and coordinate inspection so the fence meets the spec your lease or insurer is asking for.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
We install premium materials you can look up yourself rather than mystery brands off a van. When a fence ties into a James Hardie-sided home or a Tuff Shed already on the property, we match height, cap style, and color so the whole line reads as one property instead of three separate projects that happened to land next to each other. Homeowners who want a fence that matches the trim and hardscape work done earlier can see the same material approach on our home page.
If the surrounding work is part of a larger project, we keep the material story consistent. KraftMaid and Wellborn cabinetry inside, the same color discipline outside on the fence line – it’s how a property looks finished rather than assembled. Whether your fence is going next to a James Hardie house, a Tuff Shed, or an older home with no branded materials at all, we can help.
Signs You Need Fence Installation Right Now
- Posts leaning after rain. In Irving’s clay, a post set too shallow will lean within a season of heavy rain. Once two or three posts in a run have moved, the whole line is compromised and pickets start pulling free.
- Gaps at the bottom rail. Sagging rails or a gap opening under the gate signal that the frame has lost structural support. It’s a security problem first and an appearance problem second.
- Rust-through on chain link. When the bottom tension wire has rusted through or the mesh has separated from the post, patching no longer holds. That run is due for replacement.
- Rot at the soil line. Wood fence rot starts where the post meets dirt and works upward. If you can push a screwdriver into the post below grade, the post is finished, regardless of how the boards above look.
- A gate that won’t latch. A gate dragging or refusing to latch means the hinge post has shifted. Left alone, a gate can twist the fence panel it’s attached to and turn a small fix into a full rebuild.
Our Fence Installation Process – Step by Step
- 1
On-site walk and property line check. We walk the run with you, confirm the property line, check grade and drainage, and look at how the fence will tie into existing structures. We ask about HOA rules and any easements before we talk materials.
- 2
Written scope and line-item estimate. You get a written scope with materials, linear footage, gate count, and every allowance spelled out. An allowance that isn’t on paper is a surprise waiting for a date, so it goes in the estimate before you sign.
- 3
Permits pulled and inspection scheduled. On every eligible job, we pull the permit and schedule the inspection. The permit inspector works for you, not for us, and we plan for that inspection from day one.
- 4
Installation day. Posts get set in concrete, cured, then the panels and gates go on. We layout with a string line and laser level so the top rail follows grade cleanly, and we clean the site at the end of each day.
- 5
Final walk and the 90-Day Done Right Promise. We walk the finished fence with you, check every gate swing and latch, and hand over the written warranty. If something isn’t right in the first 90 days, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Irving?

Fence installation in Irving typically runs $3,500 to $9,000 for a standard residential yard, depending on material, linear footage, and gate count. A typical vinyl fence installation in Irving runs $3,500 – $9,000, while aluminum fence installation usually lands between $4,000 and $10,000.
| Project | Typical Irving Range |
|---|---|
| Vinyl fence installation | $3,500 – $9,000 |
| Aluminum fence installation | $4,000 – $10,000 |
| Wood privacy fence (standard run) | Quoted per linear foot |
| Gate rebuild or replacement | Quoted per gate |
| Fence repair over $200 | $40 off with our standing offer |
What moves the price: material type, linear footage, gate count, slope, and how many posts have to be reset. Corner lots and lots with a retained wall cost more because the layout and post setting get more involved. The way to avoid overpaying is to get a line-item estimate in writing before work starts, not a phone number that changes at the door. Our estimate is free, includes a written scope, and if you already have a written estimate from another contractor, we’ll give you a free second opinion on it. Call (833) 991-4970 for your free estimate.
Fence Installation Near Irving – Our Service Area
We work throughout Irving and the surrounding towns. If you’re in Las Colinas, Valley Ranch, or South Irving, we’re close by. We also serve Euless, Coppell, Grapevine, Bedford, Colleyville, Grand Prairie, Hurst, Southlake, Lewisville, Arlington, and North Richland Hills. Euless is a short drive from most Irving jobs, and our Fence Installation in Euless page covers that area. For homeowners just north, see Fence Installation in Coppell. Response across the Irving area is typically within a day or two for estimates.
If you’re in Valley Ranch or Las Colinas and also planning hardscape work, our driveway and paver crew coordinates with the fence install so the concrete pour and post setting happen in the right order. See Driveway & Pavers for that side of the project.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Irving

Fence installation is the process of setting posts, hanging panels, and mounting gates to define a property line, create privacy, or secure a yard. It includes grading the layout, setting posts in concrete, and finishing the run so it holds up to weather and use. In Irving, the soil and wind exposure are the two biggest factors in how long a fence lasts. Call (833) 991-4970 to talk through your project.
Most residential fence runs take one to three days of on-site work, not counting permit approval and concrete cure time. A simple side-yard run can finish in a day, while a full perimeter with gates and slope takes longer. We’ll give you a realistic timeline in the written estimate. Call (833) 991-4970 to schedule your free estimate.
Fence installation in Irving generally costs $3,500 to $9,000 for a typical residential yard. Vinyl runs $3,500 – $9,000, and aluminum runs $4,000 – $10,000 depending on footage and gate count. Your exact number depends on material, linear feet, and how many posts need resetting. Call (833) 991-4970 for an exact quote – estimates are free.
Yes. We coordinate fence height, cap style, and color to match James Hardie siding and Tuff Shed structures already on the property. That way the fence reads as part of the property rather than an afterthought. Tell us what’s already there when you call, and we’ll bring samples to the estimate. Call (833) 991-4970 to set it up.
We answer the phone 24 hours a day, 7 days a week, and we respond to storm-damaged or unsafe fencing as fast as we can get a crew out. A downed section after a North Texas storm is worth calling about the same day. Call (833) 991-4970 and a live person will pick up.
Every completed fence job is backed by our written 90-Day Done Right Promise, which is printed on the contract, not buried in fine print. If something isn’t right in that window, one call brings us back to make it right. We’ll walk the warranty with you at the final inspection. Call (833) 991-4970 to learn more.
Clear the fence line of furniture, planters, and anything fragile, and make sure we can get to the property line. Mark any sprinkler heads or buried lines you know about, and let neighbors know the crew is coming. We handle the permits and the layout once we’re on site. Call (833) 991-4970 with any questions before the crew arrives.
Schedule Your Fence Installation Service in Irving Today
If your fence is leaning, rotting, or due for a full replacement, call (833) 991-4970 and a live person answers – 24 hours a day, 7 days a week. We’ll walk your property, give you a written line-item estimate, and pull the permits before a single post goes in. There’s no trip charge inside the county, our second opinion on any written estimate is free, and senior and veteran homeowners get a permanent 10% discount. Scope in writing, allowances in writing, change orders in writing. Call for your free estimate today.
Written by the team at Barrett & Sons Construction.












