







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Cabinet Refacing Really Costs in Irving, TX – and the Drain Line Hiding Behind Your Sink Base
A south Irving homeowner called us about a $3,200 cabinet reface. By day two we’d found a collapsed cast-iron drain line behind the sink base – a $2,800 repair that changed the whole math. That’s how refacing goes in Irving’s older ranch homes. So here’s the honest answer up front: refacing kitchen cabinets in the Irving market runs about $3,000 to $8,500, and a full kitchen remodel runs $14,000 to $45,000. Call (833) 991-4970 for a free estimate, and we’ll price both paths in writing before anything moves.

Why the Quote You Get on the Phone Isn’t the Quote You’ll Pay
Most refacing bids cover doors, veneer, and labor. They don’t cover what’s behind the cabinet bases. In the 1950s through 1970s pier-and-beam ranches that make up much of south Irving, the original cast-iron drain stacks run right behind the lower cabinet runs. Decades of North Texas clay movement and slow corrosion leave those lines bellied, cracked, or collapsed. We see it often enough that we stopped treating it as a maybe.
Pull the sink base away from the wall and the pipe is right there. A $3,000 refacing decision can turn into a $6,000 project in an afternoon, mid-job, with cabinets sitting in your driveway. That’s the surprise we’re trying to keep off your invoice. When we write a refacing estimate in Irving, the plumbing contingency is a line item on the original contract, not a phone call you get on day three.
The logic is simple. Our 90-Day Done Right Promise means we absorb callbacks, so we price the hidden stuff upfront rather than surprise-bill you later. Every allowance, every contingency, every price change arrives as a written change order before the work happens. The allowance that isn’t on paper is a surprise waiting for a date.
What Moves the Number: A Line-Item Look at Refacing Costs in Irving
Refacing is rarely one flat price. The range depends on door style, how many linear feet of cabinetry you have, and whether your finish has to match a rulebook. In Las Colinas and Valley Ranch, HOA architectural reviews can require specific exterior and finish standards, which narrows your door and color options and can add to the material cost. Here’s how the numbers typically break down in the Irving market:
| Item | Typical Irving Range |
|---|---|
| Cabinet refacing (doors, veneer, labor) | $3,000 – $8,500 |
| Cabinet installation (new boxes) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Hidden drain line repair (when found) | Varies – quoted before work |
| Full kitchen remodel (for comparison) | $14,000 – $45,000 |
Notice the gap between refacing at the top of its range and a full remodel at the bottom. That gap is where the drain-line question lives. If the boxes are sound and the plumbing is fine, refacing is the smart spend. If the boxes are water-damaged or the drain stack is failing, refacing is cosmetic lipstick on a structural problem, and you’ll pay twice.

Reface or Replace? A Decision Tree for Irving Housing Stock
Here’s how we walk a homeowner through it. It isn’t a sales pitch – it’s the same questions we’d ask a neighbor over the fence.
- Are the boxes solid and square? Decades of expansive black clay soil shifting under slab foundations can rack a cabinet out of square. If the doors won’t sit flush after adjustment, new boxes are the honest answer.
- Is there water damage at the base? Soft wood, swelling, or a musty smell near the sink and dishwasher points to a leak that’s been running a while. Refacing over rot just hides it.
- What’s the drain line doing? On a pier-and-beam home, we look at the cast-iron stack before we quote finish work. A collapsed line has to be replaced regardless of which path you choose.
- Are you phasing the remodel? If a full kitchen is two or three years out, refacing now with a finish you can match later keeps the door open.
If you’re leaning toward replacement or a larger scope, our Kitchen Remodeling page covers what a full project involves, from layout changes to permit and inspection steps.
The Brand Detail That Makes Phasing Work: KraftMaid Door Overlays
Refacing gets a bad name when the finish looks thin or the door style disappears in five years. It doesn’t have to. We work with KraftMaid door overlays that carry the same warranty and finish depth as a new cabinet order. That means the doors you install today can be matched if you add cabinets or redo the island down the road. Countertops are the other half of the look – we install Cambria surfaces that hold up to the heat and daily wear of a working kitchen.
Materials you can look up beat mystery brands off a van. Ask anyone on your street, or look the brand up yourself before you sign anything. If you want to compare refacing against a full build, our Kitchen Remodeling in Irving page lays out the larger scope. And to see the full range of what we take on, start at our home page.
What Else Can Go Wrong Behind the Cabinets?
Drain lines are the big one, but they aren’t the only surprise. Old shutoff valves that won’t close, a range hood vented into a cabinet instead of outside, or a dishwasher line that’s been leaking slow for years. None of it shows on a phone quote. All of it shows once the boxes come out.
Our crew members have up to 28 years of experience and are background-checked on every visit. That experience is why we look behind the sink base first instead of last. It’s also why we price both paths – reface-plus-plumbing versus a full gut – in writing before the first cabinet door comes off. You should be deciding between two clear numbers, not getting surprised by a third one mid-project.
FAQs
Cabinet refacing in the Irving market typically runs $3,000 to $8,500, depending on door style, linear feet, and whether HOA finish requirements apply. Call (833) 991-4970 for an exact quote – estimates are free, and we’ll write both the refacing path and a full remodel path so you can compare.
Often, yes. Pre-1975 pier-and-beam homes in south Irving frequently have corroded or bellied cast-iron drain lines behind the lower cabinets, and pulling the bases away from the wall exposes them. We build a plumbing contingency into the written contract so a $2,800 repair doesn’t appear out of nowhere on day two.
Refacing is cheaper when the boxes are solid and the plumbing is sound – typically $3,000 to $8,500 versus $14,000 to $45,000 for a full remodel. If the cabinet boxes are water-damaged or out of square, replacement is the better spend, because refacing over a structural problem just delays the real cost.
Yes. Every scope, allowance, and contingency goes into the original written contract, and any price change arrives as a written change order before work proceeds. We pull permits and get inspections signed on every eligible job. Call (833) 991-4970 to schedule a free estimate and a free second opinion on any written estimate you already have.
Get Both Paths Priced Before You Sign Anything
Before you commit to a refacing bid, know what’s behind the cabinets. Barrett & Sons Construction Irving writes both the reface-plus-plumbing number and the full-remodel number in one contract, with permits pulled and the 90-Day Done Right Promise on paper. Call (833) 991-4970 for a free estimate – no trip charge inside the county.
Written by the team at Barrett & Sons Construction Irving, serving Irving, TX.
What Our Customers Say
"Addition over the garage matched the original roofline and brickwork so closely that visitors do not realise it was added. He tracked down the closest brick he could find rather than settling."
- Gideon Stroud"The bathroom was finished on the day he said at the start, which nobody had led me to believe was possible."
- Loretta Vanterpool"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."
- Redmond Cavanaugh












