







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Irving, TX
Vanities, tile, and fixtures are the three parts of a bathroom you actually touch every day, and they’re the parts that show their age first. A new vanity, fresh floor and shower tile, and updated fixtures can remake a dated Irving bathroom without moving a single wall. We’re Barrett & Sons Construction, an owner-operated crew that’s been doing this work across North Texas since 1998, and we handle the whole package – tear-out, layout, tile setting, plumbing connections, and the finish work that has to line up right.
Most Irving homeowners call us when the vanity cabinet has swollen at the base from years of humidity, or when the tile grout in a 1990s shower has gone dark and soft. If your project is part of a larger remodel, start with our Bathroom Remodeling in Irving page for the full picture. If it’s the vanities, tile, and fixtures specifically, you’re in the right place. Call (833) 991-4970 and a live person answers, day or night.

When You Need Vanities, Tile & Fixtures
These are the situations we walk into most often in Irving. If any of them sound like your bathroom, it’s probably time to talk.
- The vanity is water-damaged or out of style. Cabinet boxes built before the 2000s often have particle board that swells and crumbles once a slow leak gets in. You’ll see soft spots near the sink base or a cabinet door that won’t close square.
- Grout lines are cracked, dark, or missing. Irving’s hard water leaves mineral deposits that eat at grout over time. When the grout goes, water gets behind the tile and the substrate starts to fail.
- A shower or tub surround is dated or leaking. That pink or beige 4-inch tile from decades past is fine until the caulk lines fail. Once water gets behind it, you’re looking at a rebuild, not a patch.
- Fixtures drip, stick, or don’t match. A faucet that drips is a worn cartridge, and mismatched fixtures from three different decades make the whole room feel older than it is.
- Floor tile is cracked, loose, or hollow-sounding. When you tap a floor tile and hear a hollow ring, the thinset has let go. That’s usually a subfloor or deflection issue, not just a tile problem.
- You’re planning an accessible or aging-in-place update. A taller vanity, a comfort-height toilet, and a curbless or low-threshold shower are the changes that keep a bathroom usable for the long haul.
Our Vanities, Tile & Fixtures Process
Here’s how we run a vanities, tile, and fixtures job. No surprises, no scope creep without paper behind it.
- Walk-through and written scope. We look at the existing plumbing, substrate, and framing, then put the scope, allowances, and prices in writing before anything gets ordered. An allowance that isn’t on paper is a surprise waiting for a date.
- Material selections. You pick the vanity, tile, and fixtures. We install premium lines like KraftMaid vanities and Wellborn cabinetry, and we’ll walk you through the tradeoffs on tile format, grout, and fixture finish so you know what you’re buying.
- Teardown and prep. Old tile and fixtures come out, and we check the substrate and framing underneath. Tile only lasts as long as what’s under it, so this step gets done right.
- Rough-in and waterproofing. Plumbing and electrical get moved for the new layout, then the shower and floor get properly waterproofed and inspected where the code requires it. Permits are pulled and inspections signed on every eligible job.
- Tile, vanity, and fixture install. We set the floor and wall tile, install the vanity and top, connect the plumbing, and mount the fixtures – then check every drain, valve, and seal before we call it done.
- Final walk-through and sign-off. You inspect the work with us, and every job is backed by our written 90-Day Done Right Promise. If something isn’t right, one call brings us back.

Vanities, Tile & Fixtures Pricing in Irving
Bathroom vanities, tile, and fixtures in Irving typically run $4,200 to $18,500 depending on how much is being replaced and what materials you choose. A vanity and fixture swap in a standard hall bath sits at the low end; a full floor-and-shower tile rebuild with a new vanity, top, and all fixtures lands near the top. We give free estimates, and every price change comes as a written change order before work moves.
| Line Item | Typical Range (Irving) |
|---|---|
| Vanity cabinet and countertop (installed) | $850 – $2,600 |
| Floor tile (per square foot installed) | $9 – $22 / sq ft |
| Shower or tub surround tile (per square foot) | $14 – $38 / sq ft |
| Waterproofing and substrate repair | $500 – $1,800 |
| Faucet, shower, and trim fixture package | $400 – $1,500 |
| Tile and shower rebuild (full floor plus surround) | $3,800 – $9,500 |
What moves the price: tile size and material (large-format porcelain is cheaper to set than intricate mosaic), whether the substrate is sound or needs repair, whether plumbing has to move, and the vanity and fixture lines you choose. A simple swap of like-for-like is far less than a layout change. Ask about our $40 Off Any Repair Over $200, the Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount.
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity and tile job cost in Irving?
Most Irving projects land between $4,200 and $18,500 depending on whether you’re replacing the vanity and fixtures only or rebuilding the floor and shower tile too. A vanity and fixture swap runs lower; a full tile rebuild with new cabinetry sits at the higher end. Call (833) 991-4970 for an exact quote – estimates are free.
Can you match new tile to my existing floor or shower?
Often, yes, but it depends on whether the original tile is still in production. If the exact line is discontinued, we’ll help you find a close match or plan a clean transition line that looks intentional rather than patched. We’ll tell you honestly at the walk-through what’s realistic.
Do I need a permit for new tile and fixtures in Irving?
Cosmetic tile and fixture swaps usually don’t require a permit, but when plumbing or electrical is moved for a new vanity or shower layout, the work gets permitted and inspected. We pull permits and get inspections signed on every eligible job, because the permit inspector works for you, not for us.
How long does a vanities, tile, and fixtures job take?
A vanity and fixture replacement is typically 3 to 4 days. A full tile and shower rebuild runs 1 to 2 weeks depending on curing and inspection timing. We’ll give you a written schedule up front, and if anything shifts, you hear it from us before it happens.
Related Work We Do in and Around Irving
Most of our bathroom projects tie into the rest of the house. If your job touches a kitchen, our home page shows everything we do. We also handle kitchen remodeling in Irving, home additions and ADUs in Irving, roofing in Irving, and windows and doors in Irving. For exterior work, see fence installation in Irving and driveways and pavers in Irving. We also serve Dallas, Plano, Frisco, McKinney, Arlington, and Fort Worth with the same approach. You can also read our bathroom remodeling cost guide for more detail.
Call for a Free Estimate
Whether you need a new vanity, fresh floor tile, or a whole shower rebuild, we’ll walk your Irving bathroom with you, put the scope and price in writing, and pull the permits that apply. Premium cabinets like KraftMaid and Wellborn, honest pricing, and a 90-Day Done Right Promise on the work. Call (833) 991-4970 for a free estimate – a live person answers 24/7.
Written by the team at Barrett & Sons Construction Irving, serving Irving.


